Dimplex Opti-Myst is a series of electricity-powered fireplaces with water vapor flames. The flame is created by LED lights reflecting off the mist which is produced by Dimplex's ultrasonic technology from regular tap water stored in a container inside the fireplace.
How do you control an electric fireplace?
The fireplace must be plugged in at the wall and the wall socket turned on. The power button on the electric fireplace must be switched on. The flame effect switch must be turned on (if separate to the main power switch). The flame dial can then be used to control brightness of the flames.Nov 18, 2019
How do I reset my electric fireplace?
SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
Why is my Dimplex fire not working?
-If the fires is not responding at all to the remote control, please check that batteries are installed in the remote control and ensure they are fitted in the correct way (see the + & - markings). If batteries are already installed, please try a new set available from most retail outlets.Dec 11, 2017
How do I reset the code on my electric fireplace E3?
Display shows “E3” Manual Reset overheat protection has triggered. Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 5 minutes and allow it to cool down.
How do I unlock my electric fireplace?
Heater function is locked. Press and hold the POWER button to unlock the heater function.
Can electric fireplaces run continuously?
As long as safety guidelines are followed an electric fireplace can typically be operated for as long as required. When an electric fireplace is left unattended it should be switched off before doing so.Sep 15, 2020
How long can I run my electric fireplace?
The heater on an electric fireplace can therefore be left running for as long as desired, but can you leave an electric fireplace on all night? For safety reasons it's not recommended to leave an electric fireplace on all night. Electric fireplaces should always be operated in line with the manufacturer's guidelines.Aug 17, 2020
Do electric fireplace heaters use a lot of electricity?
Do Electric Fireplaces Use a Lot of Electricity? Electric fireplaces use approximately the same amount of electricity as the average space heater. Since most fireplaces operate on a standard household outlet, they use 120 volts to power the internal heater and draw about 1,500 watts at 12.5 amps.Nov 21, 2019
How much electricity does an electric fireplace use per hour?
Typical Electricity Usage Electric fireplaces use only about 1,500 watts of electricity. Operational costs range between 0.003 to 3 cents per hour when you use them strictly for decorative purposes -- that is, the flames are activated but no heat is produced.
Why my electric fireplace is not working?
Check the fireplace for any faulty wiring. A tightly bent or over-stretched power cord may be causing the problem. Check your fuse box or breaker for any switches that have tripped. Inspect the fuse on the electric fireplace and replace if necessary.Nov 20, 2019