A corporation stop allows the injected chemical to enter the process water line away from the edge of the pipe. This facilitates more rapid and complete mixing of the injected chemical solution. ... It is recommended that the solution tube does not penetrate further than 1⁄3 of the process water line diameter.
Why is it called a corporation stop?
When a new connection from the water main to the end user's location is called for, the standard method is to clamp a brass or stainless saddle around the water main, and utilize a drilling machine to hot tap the pressurized pipe and install a valve into the saddle's outlet. This valve is called the corporation stop.
What is a curb stop used for?
In case you don't know, curb stops are water service shutoff valves, usually located in the piping near the curb (between the water main and the building). This valve is used to start or stop the flow of liquid from the main water line.
What is corporation stop in plumbing?
Corporation Stop means a Water Service shutoff valve located at a Street Watermain. This valve cannot be operated from the ground surface because it is buried and there is no valve box. ... Corporation Stop means a water service shut off valve located at a street water main.
What is a curb stop?
A water service shutoff valve located in a water service pipe near the curb and between the water main and the building. This valve is usually operated by a wrench or valve key and is used to start or stop flows in the water service line to a building. Also called a curb cock.
What is a corp stop valve?
Corporation Stop means a Water Service shutoff valve located at a Street Watermain. This valve cannot be operated from the ground surface because it is buried and there is no valve box. ... Corporation Stop means a water service shut off valve located at a street water main.
Is a corporation stop a ball valve?
Ball Valve Corporation Stop Its unique design utilizes a TFE coated bronze ball that allows maximum flow and easier turning. The bubble-tight feature at 300 PSI makes this valve a better choice than a Plug Valve when test or operating pressures exceed 100 PSI.
What are curb stops?
In case you don't know, curb stops are water service shutoff valves, usually located in the piping near the curb (between the water main and the building). This valve is used to start or stop the flow of liquid from the main water line.