How does a marine fuel water separator work?
There is nothing like the wind in your hair and the sun on your face when you are in a boat.Almost 12 million boats are registered in the US, which makes boating a good way to get away.
To keep your boat chugging along efficiently and for as long as possible, you need to invest in proper maintenance and equipment setup.A marine fuel water separator protects your engine from pollutants in the fuel.
Water and debris can end up in fuel.Your separator makes your fuel as clean as possible.
How does it work?Do I need a marine fuel water separator?Let's take a look at the device.
A fuel water separator is a small device that is fitted into the fuel system to make sure fuel is free of water.In a marine environment where there are more chances for water to get where it's not wanted, they're important.
If you have a newer boat, it might come as standard equipment, but it's a simple job to add it to an older boat that doesn't have one yet.
It isn't a big deal if you get some water in the boat motor.
Water in the fuel can damage the engine.You will have to get a professional to drain the tank and dispose of the fuel if you discover that you don't have a separator.
Water in your fuel can cause rust on parts and loss of lubrication on injector components.Poor engine performance is what you end up with.
The growth of germs in the fuel tank is one of the possible consequences.The gunk makes the engine work hard, and eventually it won't start.
How does water get into the tank?There are incorrect fuel tank breathers and tank fillers.Something can be done to keep water out.
The need for a separator is because the other two ways are out of your control.Purchase of contaminated fuel and the development of condensation are included.
condensation forming in the tank is the biggest risk.The air in the tank is being forced out during the day.The air is drawn back into the tank at night as it cools.
The fuel is pulled from the tank into the engine by the fuel pump.The inlet side of the fuel line has a fuel water separator on it.
The process is based on simple science.It is easy to separate water from fuel because it is heavier.
On its way to the engine, fuel is drawn into the separator.It goes through a chamber that spins the fuel to separate the denser water.The water goes to the collectionbowl at the bottom.
The fuel goes through a paper filter that removes water and other particles.
How do you choose the best separator for your boat?There are many variations to meet the requirements of higher pressure fuel pumps.This product allows you to configuration your components.
The fuel flow rate is not the same as fuel consumption, so you need to look at that when choosing a separator.The amount of fuel that needs to move through the system is called flow.You want to make sure you get the correct size for your engine.
Engine size is related to that.A bigger engine needs a bigger separator than a smaller one.
In choosing a device, the environment where you do your boating plays a role.It is not important to have a super efficient one mounted if you only have moderate usage levels.If you're on a lake with a lot of debris or in a high humidity climate, it's important to have one that can keep up with the potentially higherContamination levels.
There are different types of filter elements as well.Most marine systems use 30- and 10-micron filters.The needs of most boat engines are met by the 10-micron.
Clear plastic, aluminum, or some combination can be used to make the inspection bowl.A solid metal bowl is fine if you are good at emptying it.If you need a visual cue to empty it, make sure there are some see-through parts.
When you find out your tank has too much water, it can ruin your day on the water.Your boat is ready to hit the waves whenever you are and a marine fuel water separator protects you from damage to the engine.