How far can you run 12 gauge wire on a 20 amp circuit?

How far can you run 12 gauge wire on a 20 amp circuit?

You can run a 12 gauge wire up to 70 feet on a 15 amp circuit. That number drops to 50 feet if you run 12 gauge wire on a 20 amp circuit.

Can you use 14 gauge wire on a 20 amp circuit?

14 AWG must be protected at 15A, according to NEC 240.4(D)(3). 14 AWG can't be used on a circuit with a 20A breaker. The screw terminals are the better choice if you want to put 15 Amp receptacle on a 20 Amp circuit with 12 gauge wire. You can use the side terminals.

How far can you run 12 2 wire on a 20 amp breaker?

After these distances, the circuit will go over the recommended 3% voltage drop. You can run a 12 gauge wire up to 70 feet on a 15 amp circuit. That number drops to 50 feet if you run 12 gauge wire on a 20 amp circuit.

What happens if you use 14 2 wire on a 20 amp circuit?

It is generally NOT okay to have a 20A circuit breaker on a circuit that has any 14 gauge wire -- and most homeowners won't run into the exceptions. If there's any #14 wire anywhere downstream, you must use a 15A breaker to protect that wire.

What size wire is required for 20 amps?

Building codes based on the National Electrical Code prohibit the use of 14-gauge wire anywhere on a 20-amp circuit. All wiring in such circuits must be 12-gauge or larger.

Can 14 AWG handle 20 amps?

14 AWG must be protected at 15A, according to NEC 240.4(D)(3). 14 AWG can't be used on a circuit with a 20A breaker. The screw terminals are the better choice if you want to put 15 Amp receptacle on a 20 Amp circuit with 12 gauge wire.

Can you use a 14 AWG on a 20 amp breaker?

14 AWG must be protected at 15A, according to NEC 240.4(D)(3). 14 AWG can't be used on a circuit with a 20A breaker. The screw terminals are the better choice if you want to put 15 Amp receptacle on a 20 Amp circuit with 12 gauge wire. You can use the side terminals.

Can I mix 12 and 14-gauge wire on a 20 amp circuit?

It's perfectly safe to use it. Don't worry about confusing future workers. If they want to add something to the circuit, they will have to go turn off the circuit breaker first, and then they will see they are working with a 15 amp circuit.