Most shingle manufactures recommend using four nails per shingle on the main area of your roof and five nails per square in the first row of roofing. This adds up to an average of 320 nails or 100 square feet.
How many nails do I need for 2 squares of shingles?
Shingle manufacturers recommend using four nails per shingle in the main part of the roof and five nails per shingle in the first row, says Owens Corning. This amounts to an average of 320 nails per square, or 100 square feet. In high-wind areas, you need five nails per shingle, or 480 nails per square.
Should shingles be stapled or nailed?
Fasteners for asphalt shingles should be roofing nails or staples. The head of a roofing nail or the crown of a staple is what actually holds a shingle in place. ... If staples are properly installed, they offer nearly the same wind resistance as nails.
How many fasteners do you need for shingles?
In most cases, 4 nails are adequate. Position the nails appropriately according to the shingle installation instructions. Align shingles properly to avoid nail exposure.
How many pounds of nails do you need for a square of shingles?
2 ¼ pounds
What is the nail pattern for shingles?
Use 4 nails per shingle placed 6-1/8" above the butt edge, 1" and 13" in from each end and 1/2" above each cutout. Drive nails straight so that nail head is flush with, but not cutting into shingle surface.