Nominal Size (inches) Actual Size (inches)
--------------------- --------------------
4 x 4 3 1/2 x 3 1/2
4 x 6 3 1/2 x 5 1/2
6 x 6 5 1/2 x 5 1/2
5/4 x 6 1 x 5 1/2
How much does an 8 foot board weigh?
An air-dried 2×4 x 8-foot-long lumber board made out of Douglas Fir weighs about 10 pounds. A board with the same dimensions made out of Sitka Spruce only weighs around 8 pounds.
How much does an 8 ft stud weigh?
A pressure-treated 8-foot 2×4 piece of Southern Yellow Pine weighs 17 pounds or about 2.1 pounds per foot, significantly more than a piece of untreated wood.
What does a treated 2x6x10 weigh?
The answer is 14 – 26 lbs. Quite the curve there. Well you need to understand that wood is pretty much a big sponge soaking up moisture wherever it can. A kiln dried 2x6x8 weighs in on the lighter end at around 14 lbs while the pressure treated 2×6 weighs in closer to the 26 lb range.Aug 25, 2020
What are the dimensions of a pressure treated 4x4?
The outside dimensions of the standard 4x4 measure 3-1/2" x 3-1/2", and the outside dimensions of the standard 6x6 measure 5-1/2" x 5-1/2".Jun 10, 2011
What is the diameter of a 4x4 post?
So, if you're planning on using a four-inch round or 4x4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that's 36 inches deep and 12 inches in diameter.Feb 26, 2021
How tall are 4x4 posts?
What are the dimensions of a standard 4x4 or 6x6 wood post? The lumber industry defines standard wood post sizes as 4x4 or 6x6. The outside dimensions of the standard 4x4 measure 3-1/2" x 3-1/2", and the outside dimensions of the standard 6x6 measure 5-1/2" x 5-1/2".Jun 10, 2011
A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.Aug 14, 2021
Will 4x4 posts warp?
Understanding the end grain 4x4s are typically made from “peeler cores,” which are the byproduct of plywood production. ... Peeler-core posts are more likely to warp and twist than posts cut farther away from a tree's center. When shopping for 4×4 pressure treated posts, look at the ends.Dec 1, 2021
How much does a 10 foot 4x4 post weigh?
Q:what is the weight of a 4x4 10ft.? A: 48 lbs.
How do I choose a 4x4 post?
When shopping for 4×4 pressure treated posts, look at the ends. If growth rings start near the center of the post and expand outward, it's almost certainly made from a peeler core. If the rings are off center, it's not the log's center. Our suggestion is to buy 10-ft.Dec 1, 2021
What can you make with 4X4?
- DIY Scrap Wood 4×4 Picture Frame // Pretty Handy Girl.
- Patterned Pencil Holder // BHG.
- 4×4 Glitter Firecrackers // Organize & Decorate Everything.
- Chunk Alphabet Blocks // That's My Letter.
- Outdoor Giant Dice Game // DIY Show Off.
- “A” is for Apple Paperweight // That's My Letter.
How much load can a 4X4 support?
The load capacity of a 3-foot #2 grade 4×4 is 17,426 pounds, and a similar 6×6 is 20,834 pounds or 16% better. However, an 8-foot 4×4 supports 6468-pounds and 2339-pounds at 14-feet, while a 6×6 is 18032 and 10550-pounds respectively – or 64% and 78% more load capacity.