How much does a transfer case cost?
The New Process is a transfer case.The transfer case is made of cast aluminum.The light-weight cast aluminum housing of this transfer case makes it easier to handle.The transfer case has a low ratio of 2.61:1.The shift fork is the weakest part of the transfer case.The transfer case was used in production vehicles.The round identification tag on the case makes it easy to identify the GM version.The transfer case has a right hand drop configuration and a rear slip yoke.The GM NP208s have either a female 27 tooth input or female 32 toothinput, both of which were originally coupled to a 700R transmission.
The New Process 241 is a chain-driven transfer case.The transfer case is made of cast aluminum.The light-weight cast aluminum housing of this transfer case makes it easier to handle.The transfer case has a low ratio.Since this is the newest design of the New Process transfer case models, there are few weak links.The transfer case is used in both right and left hand drop configurations.Since the bolt pattern on this transfer case is symmetrical, the adapters we manufacture work the same.The transfer case is used in production vehicles.The round identification tag on the case makes it easy to identify the GM version.The transfer case is usually a right hand drop on vehicles with a solid front.The GM NP 241s have either a female 27 tooth or female 32 tooth input, which can be coupled to a 700R or 4L60E transmission.
Both of the transfer cases use the same conversion.The crossmember support used by GM is one of the only areas of concern with these transfer cases.Vehicles 1981-1984 used a crossmember with a drop and the stock accessory had a long foot.The 1985 and newer vehicles came with a crossmember that was tucked up tightly to the frame rails, requiring a short foot on the adapter housing.Only a few of our adapters retain the stock housing in which this will not be a problem.The later crossmember support is what the new adapter kits are designed for.You may be required to purchase a later model GM crossmember if you are converting a 1981-84 vehicle.
This transfer case has a female input.The 700R has a long foot.The new casting was short foot.
The transfer case has a female input.SM465's up to 1984 have a long foot on the casting.
There were a few TH350 transmissions used in GM vehicles.The length of the stock adapter on these applications is approximately 5.
There are some examples of the different O.E.There are differences in the height and length of the castings.
NP208-SM465 long foot 1 NP206 NP241- SM465 short foot.