How much horsepower does a 1970 351 Cleveland engine have?
How much horsepower does a 1970 351 Cleveland engine have?
Year 1970 1970
-------------- --------------------- ---------------------
Power (hp) 250 hp @ 4,600 RPM 300 hp @ 5,400 RPM
Torque (lb/ft) 355 lb/ft @ 2,600 RPM 380 lb/ft @ 3,400 RPM
Compression 9.5:1 11.4:1
Displacement 351 cu / 5.8 liters 351 cu / 5.8 liters
How much horsepower does a 1971 351 Cleveland have?
Year 1971 1971 Boss
-------------- --------------------- ---------------------
Displacement 351 cu / 5.8 liters 351 cu / 5.8 liters
Power (hp) 240 hp @ 4,600 RPM 330 hp @ 5,800 RPM
Torque (lb/ft) 355 lb/ft @ 2,600 RPM 380 lb/ft @ 3,400 RPM
Compression 9.5:1 11.0:1
Which engine is better 351C or 351W?
"The 351W is a basic 302-type engine. The 351C engine got all the hype, but what we race today is the basic W or a combination of the two. The W is a better engine for long-lived low RPM power. It needs proper preparation to race, and, as it has the better torque curve on the low end, it is not a high rpm engine.Jul 19, 1996
What is a 351 Cleveland Cobra Jet?
The Q-code 351 "Cobra-Jet" (also called 351-CJ, 351-4V) was produced from May 1971 through the 1974 model year. It was a lower-compression design that included open-chamber 4V heads.
How many cubic inches can you get out of a 351 Cleveland?
The 351 Cleveland began production in July 1969 1969 for the 1970 model year. Its actual displacement was 351.9 cubic inches (5,766 cc). A 4V (four venturi) performance version and a conventional 2V (two venturi) version were built.
What's the most horsepower you can get out of a 351 Cleveland?
With Ford's 4.000-inch bore/4.000-inch stroke combination and conservative tuning, you can achieve 400 hp and 450 torque numbers along with durability.
How do I know if my Cleveland is a 302 or 351?
If it's a Cleveland measure the stroke. Remove a spark plug and use something like a dipstick through the spark plug hole to find top dead center of the piston. Then measure piston travel while turning engine by hand. 3 inches it's a 302 and 3.5 inches it's a 351.Aug 17, 2010
How do you tell the difference in a 351 Windsor and a 351 Cleveland?
On a Cleveland/Modified engine, the radiator hose (and thermostat housing) sticks vertically right out of the top of the engine block. Windsor engines have the radiator hose and thermostat installed into the intake manifold, where it exits from the front of the engine. Valve Covers.Apr 3, 2020
How do you tell the difference between 2V and 4V 351 Cleveland?
The biggest physical difference between the 2V and 4V Cleveland heads is the huge intake and exhaust ports on the 4V heads. There simply isn't enough material around the smaller 2V ports to hog them out to mate to 4V port dimensions.Aug 15, 2016
What is the bore on 351 Cleveland?
Ford 335 V8
--------------
Displacement
Cylinder bore
Piston stroke
Block material
What is the difference between a 302 and a 351 Cleveland?
You can spot the difference pretty easily by looking at the front of the engine. On a 302 (or smaller c.i.d.) blocks, the distributor mount is almost flush with the top of the block (where the intake sits). ... A 351W block is taller. So, the distributor mount is below the block surface where the intake sits.Aug 16, 2018
What is the difference between a 351 Cleveland and a 351 Cobra Jet?
1970: Meet the 351 Cleveland Bore and stroke were the same on the 351W and 351C, though the block was completely different. A quick way to tell the two apart is that the 351C has the water pump housing cast into the block, while the 351W block is flat at the front.Jun 12, 2016