Several days before closing, shock the pool with a chlorine shock or non-chlorine shock, using at least 2 lbs per 10,000 gallons (follow package directions). Allow the chlorine level to return to 1.0-3.0 ppm before adding any winter algaecide or your pool cover.
Should you shock pool before closing?
Shocking kills any bacteria that might linger in your pool during the winter. We recommend shocking a few days before you close the pool. If that is not possible, make sure to shock the pool the night before you close it for winter.
How much chlorine do you need to close a pool?
Total Alkalinity should range between 80-120 ppm. Calcium Hardness should range between 200-400 ppm. Free chlorine should range between 1.5-2.5 ppm.
How do you shock a pool at closing?
Shocking your pool is easy: Use a shock treatment to bring your 10 to 12 PPM. Then, wait a day or two for the chlorine to come down to its normal level, about 1.5 to 3.5 PPM. Pro tip: For best results, shock your pool a few days before you plan to shut it down.
What chemicals should I put in my pool when closing?
- Chlorine.
- Pool Shock.
- Soda Ash.
- Baking Soda.
- Muriatic Acid.
- Winter Algaecide.
- Pool Antifreeze.
- Stain and Scale Prevention.
Can you use shock to winterize pool?
Regular chlorine pool shock or non-chlorine pool shock is usually the best choice as a winterizing pool shock. Follow the label instructions to add the proper dosage. If you have visible algae, double the dose, and then brush the pool.
Should I put chlorine in my pool when I close it?
https://www.youtube.com/watch?v=67Y0JQXIJ0c
What to add to pool before closing?
One week prior to closing your pool, add a phosphate remover to help keep algae out and prevent any potential algae blooms. We recommend waiting to close your pool until the water temperature is consistently below 65 degrees. Closing too early will run the risk of algae growth.
Should I put algaecide in my pool before closing?
By simply adding algaecide to your water prior to closing, you can prevent algae growth from occurring during the cold, winter months which makes for an easier opening in the spring. You can apply algaecide directly to the pool water and allow the pump to continue to circulate for approximately two to four hours.
Should I backwash my pool before closing it?
The first thing you'll want to do before closing your pool is balance the water chemistry. Also, make sure to thoroughly brush and vacuum the pool and clean your filter by soaking it in a filter cleaner for 24 hours. Next, the day before you close, backwash the filter and then super chlorinate the pool.
What chemicals do I need to close above ground pool?
Before you winterize your above ground pool, make sure you've got the necessary supplies: Winterizing chemical kit or pH increaser, Alkalinity increaser, Calcium hardness increaser, Pool shock, and Algaecide. Clarifying enzyme supplement (optional, but recommended)Sep 5, 2020
Should you backwash before closing pool?
#6: Backwash Your Filter You want to let your run for a full cycle before backwashing and chemically cleaning your filter before closing your pool.
How do you prepare a pool for closing?
- Balance water chemistry: The week you're closing your pool, make sure your water falls within the ranges below.
- Add shock and algaecide:
- Clean pool:
- Store equipment:
- Lower water level:
- Drain pump, filter, chlorination and heating equipment:
- Lubricate:
- Winterize plumbing:
Do you need to test pool water before closing?
A thorough cleaning before closing for the season will help to prevent algae growth and lighten your workload when it's time to open it back up. It's best to take a sample of your pool's water to a reputable pool store to have it tested.Sep 5, 2017