How much space do you need for a suspended ceiling?
Depending on the room size and material quality, the average cost of a drop ceiling is $1,770.Ceiling tiles and grid rails cost $3 to $23 per square foot.Adding more to the price are rail covers, insulation tiles and lighting.
Drop ceilings cover damaged/stained ceilings, decrease noise from outside the room, and hide plumbing pipes and wiring.The grid and tiles are the basic parts of them.The grid is attached to the walls by beams.The beams hold the tiles in place with a small ledge.
The cost to install a drop ceiling is between $5 and $28 per square foot.If you want decorative rail covers, add $1 per linear foot or $2 per square foot.
The labor cost for a ceiling tile installation can be as high as $5 per square foot.The average cost of grid rails and ceiling tiles is $13 per square foot.Fiberboard tiles are the cheapest at $2 to $7 per square foot, while wood could cost you up to $20 per sq foot.
Installation of the grid and tiles can cost anywhere from $2 to $5 per square foot.For a 10-foot-by-12-foot room, you could pay up to $1,200 for labor alone.There are more lighting, switches and decorative accents.Installation costs for all ceiling types are in the middle range.
Most of the labor rate goes to the drop ceiling grid install.To get the right look, contractors have to make sure the grid is level.In areas with exposed ductwork and pipes, this can prove to be even more time consuming.
The average cost to install suspended ceilings is $3.50 per square foot.There is no difference in price for this term.
If you need a permit, add at least $400 to the total.Most cities don't issue permits for this type of project, so it's best to check with your local code enforcement office.While you are there, ask about the minimum amount of space between the old ceiling and the new one.
If you want to add lighting, vent or other features, you may need a contractor.They can let you know if you need a permit for the work they are doing.
Extra wires may be needed in large rooms.Since they can take a lot of time to install, this might add to your material costs and increase your labor rate.
The cost to put a drop ceiling in a 400 square foot basement is between $2,000 and $11,200.For that larger space, you need between $1,200 and $9,200 in materials.With the square footage, labor increases and lands in the $800 to $2,000 range.If your basement has exposed wiring, plumbing pipes and ductwork, ceiling installation experts will increase the price even more.The job can be extended by a day or more if you work around those elements.
Ceiling tiles cost $1 to $20 per square foot.Standard mineral fiberboard and plastic can be found in the $1 to $4 per square foot range.The cost of high-end metal and wood is between $3 and $20 per square foot.You can get the tiles in two foot by four foot sizes.
Residential tiles come in a variety of styles, including stamped and Embossed decorative tiles.They help block noise from coming through the ceiling.The major producers of ceiling tiles are CertainTeed and USG.
Ceiling tiles are $4 to $80 each, while two-foot by four- foot panels are $8 to $160.If you want them to match perfectly, buying just one or two can be difficult.It doesn't hurt to have a case hanging around whenever you need to replace a panel, because you can often find single tiles for sale at hardware stores.
Black acoustic ceiling tiles cost $2 to $7 per square foot.You can get a box of 16 one-inch thick, two-foot-by-two- foot panels for less than $150.You will need about two for a 120 square foot room if you have a single case that covers 64 square feet.The tiles look great and block a lot of noise, so they are a great addition to a gaming or movie theater room.
You can pay $2 to $7 for every square foot if you remove a drop ceiling.The cost to demo the interior materials could range from $240 to $840 for a 10-foot by 12-foot room.Adding $60 per square foot will cover the cost of raising the ceiling.The price goes up even more with paint, paint and lighting.
You might be tempted to do the work yourself if you can save up to $5 per square foot.It is an easy job, but there is a lot of work involved.It takes a lot of time and labor to set up ladders and scaffolding.It is worth the extra cost to let someone else handle it.
You can rest assured that when you hire a ceiling contractor, they will work just like you want them to and last for a long time.To find the one with good references, excellent past work examples, and a solid guarantee on their workmanship, get several bids from different contractors.
To make sure you know what to look for in a team, ask the following questions.
Drop ceilings must be installed in a room that is at least 7 feet tall.Always check with your code enforcement office to make sure the rules are correct.
Drop ceilings are more expensive to install than drywall.Installation of drywall costs $1 to $3 per square foot, but that doesn't include painting prices, which are $2 to $6 for each squarefoot.