How often should I change my hot Tub Filters?

My hot tub's filter is something I don't think about a lot.I wonder how often you should change your hot tub filter.

The hot tub filters should be replaced every 1-2 years.The filter should be washed with a garden hose about twice a month, and a chemical soak every 3 months to prolong its life.

There is more to know about hot tub filters, whether you can clean them, toss them in the dishwasher, or how long they last.

The hot tub filters are designed to catch the following types of pollutants in the water:

I am not talking about the drain at the bottom of the tub.The water is pulled into the heating and pump system if your tub has more than one of those.There is a mesh cover over the pipes to keep debris out.

You clean those with your hand while you sit in the tub, tossing hair or leaves over the side.

The filter is out of sight and is usually a foot long with a blue plastic top and bottom.The paper gets sucked into the hot tub as the water goes through the combs.

You just turn the whole thing clockwise and thencounterclockwise to replace it.

If you do a good job of those things, your filter will last between 1-2 years.Some places on the internet will give you a time frame.

We use it a fair amount the rest of the year, even though we don't use a lot in the blazing summer heat of Texas.Around once a year, I air on the lower side.

I don't know what hot tub filters are, but there are over 5,000 results on Amazon and each one is different.

I looked at all the brands on Amazon and there was a clear winner.

POOLPURE is the best brand of hot tub filters on Amazon, with the most consistently great reviews.You can find all the sizes on Amazon by clicking the link.

While you go through the regular cleaning and drying process with your main filter, it is a great idea to have an extra filter on hand to use.You already have a new one ready to go if you only use the spare for that.

Depending on how often you use the hot tub, it's a good idea to take the filter out.What is the process of cleaning a hot tub filter?

While you can just use your garden hose, one thing I have found that is life-saving is attaching a cleaning attachment onto the end of your hose which makes it incredibly easy to remove hair, leaves, and other junk that gets caught up in the hot tub filter.

The Filter Flosser is the best-rated product of that type on Amazon.It screws onto the end of your hose, and it has individual jets to get in between the folds.

If you do a lot of research, you will likely see a thing called a blaster automatic filter cleaner.

I have yet to see one with a good review.Most people have at least 20% of their reviews on Amazon at the 1-star level.I would steer clear of those since they cost over 100 bucks.

You should do a more thorough cleaning every 3-6 months after your 1-2 month hosing off.If you do a good job of the regular cleanings, the range will be based on how often you use it.

This involves hosing it off and then soaking it to get rid of oils and mineral deposits.

SpaDepot is the best one I have found.Add enough water to cover the filter and put a quart in a bucket.After soaking overnight, rinse thoroughly the next day.

You should get at least 4 cleanings out of 1 order if you buy this 2-pack for 20 bucks.

Make sure to rinse the filter before you put it back in the hot tub.

If you were using a leak-stop product like Marlig Fix-a-Leak, you should always remove your filter.

It would be better to run the hot tub without a filter if you only have one and it is incredibly dirty.

The lifespan of the hot tub pump can be shortened by using a filter that is heavily clogged.

On an ongoing basis, the filter is there to stop hair, leaves and other larger contaminants from getting into the pump, heater, jets, and pipes.Those things can cause a problem which can break your equipment or require extensive work to clear the problem.

The hot tub filters are made of paper.The paper has been folded.The debris is pushed into the paper folds by the pump that circulates the water.

Even on a delicate cycle, a washing machine would still be spinning, knocking your filter all over the place.

A dishwasher is designed to remove food debris from ceramic plates, pots, pans, and glasses.It's too harsh for a hot tub filter.

It is tempting to use a device like that to help keep your filter clean, but don't do it!

It will make those pleats look new.The bleach can damage the folds and shorten the life of the filters.

There are ways that bleach can be used to clean a hot tub.In a recent article on my site, I talked about those ways.

The one thing that can ruin your hot tub is bleach.

Every 3-6 months you can do a mix of water and white vinegar for your filter soaking.The filter should be soaked for about 2 hours.Allow to dry and then replace in the hot tub.

This works well if you keep your filter clean.If it is grimy, you will want to use a pool mate filter cleaner.

We looked at how often to change them and how frequently to clean them.We looked at whether cleaning with bleach was a good idea.

We were able to answer the question of how often you should change your hot tub filter with an answer of about once a year.

Jeff Campbell is a husband, father, martial artist, budget-master, Disney-addict, musician, hot tub lover, and recovering junkie having spent over 2 decades as a leader for Whole Foods Market.

Have you noticed that you have to add more chlorine to your tub?You keep adding more, but it's not on the test strip.You are probably...