Maintaining normal levels of chemicals in pool water is dependent on a clean and functioning spa or hot tub filter.Cleaning and replacing filters is a simple task that is necessary for prolonging the life of individual spa components.It is easy for pool owners to remove, rinse, and replace.
Step 1: Take a look at your filter.
The filter can be seen from the inside of the spa system.It can be found inside a canister, cradle, or lid.Check your owner's manual to locate the filter if you don't see it.
Step 2: Before you remove the filter, turn off the spa system.
The parts of the spa systems need to work together to get the best results.
Step 3: The filter should be turned clockwise.
Move with care to prevent damage.The filter for the bottom threads may need to be removed.Pull the filter out of the compartment if it loosens.
Step 4: You should consult your owner's manual.
Many styles of filters can be easily removed with a counterclockwise turn, but not all of them.Allow your owner's manual to walk you through the removal process if a gentle twist does not loosen your filter.
Step 5: The filter should be looked at for damage.
If you feel like the center core element is loose, do not clean the filter.To prevent jet lines from becoming prone to debris build-up, be sure to replace damaged filters.
Step 6: You can use a cleaning wand to clean the spa filter.
There is a cleaning wand that comes with soft comb-like teeth that you can attach to your garden hose.Hold the nozzle at a 45 degree angle and use the comb to open and rinse the debris from the pleats of the spa filter.
Step 7: The products should be added to the water.
The sticky, tar-like film ofbacteria that can grow in pools and spas can be prevented by breaking up oils and other pollutants.Adding a weekly dose of cleaner directly to the water prevents a scummy ring of oils from building around the filter core.
Step 8: The filter should be looked at for remaining debris.
Look for dirt build-up or large debris when you part the pleats of the filter.Throw away any large pieces of debris.
Step 9: There is a bucket with water.
The amount of water needed to immerse a spa filter is usually five gallons.Cold water will clean the filter just as well as hot water, so don't worry about water temperature.
Step 10: It's a good idea to mix in a mild cleanser.
Determine how much should be added per gallon of water by following the instructions on your brand of spa filter cleanser.Do not use anything other than a filter cleanser.Some people choose to use bleach or detergent to clean filters, but these harsh chemicals may actually damage filters or cause issues with water chemistry.
Step 11: The weekly cleaning steps are repeated.
If you want to treat the spa filter with cleanser, be sure to protect your spa by turning it off and inspecting it for damage.If you have leftover debris, spray it with your hose-head cleaning wand.
Step 12: The filter needs to be soaked.
You should soak for about an hour if you used hot water.Allow the filter to soak overnight if you filled your bucket with cold water.The pool should be off while the filter is soaking.
Step 13: The filter should be cleaned with a cleaning wand.
It's a good idea to rinse it after it has soaked.To prevent dirt from being driven into the core, hold the cleaning wand at a 45 degree angle.
Step 14: The water should be clean.
Add cleansing chemicals directly into the water to follow the instructions in your spa's owner manual.Improper cleaning and water chemistry can lead to the growth ofbacteria that can make you sick.The components of your spa system can be damaged by excess residue.
Step 15: Be patient.
Taking your time will ensure that you remove as much debris as possible, which will prolong the life of your filter.The next round of cleaning will be even easier if you provide a thorough cleaning this time.
Step 16: The filter needs to be white.
If you want the filter to be free of debris, it should be white.Don't put it in your spa system if it is black or slimy.You will most likely encounter an unusable filter at some point if you don't install a new filter every three years.It's a good idea to keep an extra filter in storage.
Step 17: The filter needs to be put in place.
To replace a filter, reverse the removal process.twisting it to the right is required for most filters.
Step 18: Start your hot tub.
Before you use the spa, allow it to run for one full cycle.This will deplete any debris that may have been collected.