How to adjust your flame to burn with no smoke is...
You might have to deal with some problems when using a kerosene heater.You need to know how to deal with them properly to avoid accidents.Even an innocent looking problem may prove to be disastrous with this type of heating device.
tar build up on the wick is the most common reason for this problem.The way to fix this is to burn the wicks dry in order to remove the tar and resin deposits from it.It will produce a lot of smelly and harmful gases if done outdoors.Before it goes off, turn the wick up to the maximum height.
It is possible that your wick is too old and dirty.If that happens, you will need to replace your wick with a new one.
A dirty wick is one of the reasons for that.If you follow the steps above, you will be able to fix this.
You will need to find a way to smother the flame before you can deal with it.Either blow the flame out or smother it.Remove the burner unit and the wick with pliers after the unit is completely cooled off.The most likely reason why the heater wouldn't turn off was because it was too dirty.It is possible to burn it dry as it is removed from the heater and reinstalled.Simply replace it if it is too far gone.
There are a number of reasons you might want to look for if you have a hard to ignite kerosene heater.
This problem is most often caused by a dirty or older wick.If you want to get rid of the heating element, burn it dry and then put it back in the device.If it can't be salvaged, replace it.
As you don't want to risk inhaling too many fumes, each of the possible causes needs to be solved as soon as possible.The most probable issues are listed.
When the wick is set too high, this happens a lot.It is easy to fix, but it needs to be done as soon as possible.