How To Change Strings on an Acoustic Guitar Without Pins
Bridge pins are used to wedge the ball end of the string against the bridge plate.This guide will show you how to change the strings on a bridge guitar.
Step 1: If the string is loose, turn the tuning peg.
Some players believe that removing all the strings at the same time will relieve the neck of strings tension.This guide will change the strings at a time starting with the thickest string.If you have a string winder, it will allow you to wind and unwound the tuning pegs quickly.
Step 2: Pull the string out of the tuning post.
Step 3: Remove the string from the bridge until the ball-end is exposed.
Remove the string from the bridge.
Step 4: Put the plain end of the new string through the bridge hole.
Pull the string until the ball is completely seated.
Step 5: The tuning peg has a hole in it.
Pull the string all the way through the tuning peg and give it enough slack so that it can wrap around the post four times.
Step 6: To tighten the string, turn the tuning peg in the right direction.
The string should be wrapped above the loose end.
Step 7: The string can be used to pitch.
It's best to use an electronic guitar tuner for beginners.
Step 8: Attach a pair of wire cutter to the excess string.
If the string is cut too short, it will come loose.
Step 9: For the remaining strings, repeat all steps above.