A lot of people love the sneakers.They are comfortable to wear and go with just about anything.They are blank canvases for any artist.Markers, paints, or fabric dyes can be used to colored the fabric parts.Markers can be used to color the rubber parts.
Step 1: A clean shoe is what you should start with.
Brand new are the best to work on.You will need to clean the ones you already own if you can't get new ones.It will help the ink stick.The rubber parts should be wiped down with a cotton ball.Use a damp towel to wipe down the fabric parts.Let the shoe dry.Markers that are translucent will show up best against a white shoe.Try to get white ones if you are going to buy a new pair.Remove the shoe laces if you are going to color the entire shoe.You can color them as well.
Step 2: Permanent markers or fabric markers are available.
All parts of the shoe will be marked with permanent markers.They will show up best against white Converse because they are translucent.The fabric part of the shoe is the only part that fabric markers can work on.They can be used on the rubber part.It's important to get the right fabric marker.You should get a fabric marker for dark or colored fabric if your shoe is colored.You can use any type of fabric marker if your shoe is white.
Step 3: Try to come up with a design on a piece of paper or fabric.
It will be hard to get rid of any mistakes once you start coloring.You can sketch out your design on a sheet of paper or fabric and then use markers to color it.Try simple designs, such as hearts and lightning bolts.Geometric designs can also be tried.If you want to color the rubber parts, practice on a sheet of paper.If you want to color the fabric parts, try to practice on a scrap of canvas, linen, or cotton fabric.The texture will give you an idea of what it's like to color on the brand.
Step 4: You can draw your design on the shoe with a pencil.
If you have white shoes, sketch lightly so that the pencil doesn't show through.If you have dark shoes, use a white colored pencil.
Step 5: The lightest colors first and the dark colors last in your design.
Depending on the type of marker you are using, you may need to wait for the ink to dry before moving onto the next color.Don't start with the dark colors.If you do, the ink will smudge and make the colors muddy.If you are using markers for colored fabrics, shake it first and then tap the tip on a flat surface.It will help get the ink into the felt tip.Don't do the tapping part on your shoes because the ink will gush out.
Step 6: If you want to add the outlines, wait until the ink is dry.
The outlines can help make your work stand out.Try to use thicker lines on the larger shapes.
Step 7: The shoe's fabric should be sprayed with a shoe sealant or a waterproof spray.
You can use spray-on.If you choose to use it, make sure that it is not shiny.This will help protect your work.You don't need to spray the rubber parts if you colored them.The rubber parts of the designs will wear off on their own, so keep that in mind.
Step 8: The laces need to be put back in before you can wear your shoes.
The work will still be delicate even with the seal.Try to keep your shoes dry.
Step 9: Finished.
Step 10: The rubber parts should be covered with masking tape.
The method only works on the fabric of the shoe.The rubber won't stick to the paint for long.You will need permanent markers to color the rubber parts.If you only paint the sides of the shoe, you don't have to remove the laces.
Step 11: Try to come up with a design on a sheet of paper or fabric.
It will be hard to get rid of any mistakes once you start painting.You can sketch out your design on a sheet of paper or a scrap of fabric, then color it with paint and paintbrushes.Cotton, linen, or canvas fabric gives you the best feel for what it's like to work on Converse.Paper can do in a pinch.Thin your paint out with some water if it's too thick.
Step 12: Use a pencil to draw on the shoe.
Press lightly so that the pencil doesn't show through.Use a white color pencil if your shoe is very dark.The best designs include stripes, stars, and hearts.Painting your favorite character in cartoons or comics is a good way to express yourself.
Step 13: If you are using acrylic paint, fill your design with paint primer.
This will make your colors last longer.Before you move on to the next step, make sure the paint primer is dry.If you are using fabric paint, you don't need primer.
Step 14: The largest shapes are the first to be colored in.
First, paint the edges and then fill in the shape.Wait until the paint dries to add any details.If you want to paint a bug red, you should paint the whole thing first.The spots should be added after the red paint has dried.Some colors, such as yellow, will need several coats before they show up.If you want the outline to be black, wait until the very end.Wait for the paint to dry and then paint over it if you make a mistake.
Step 15: Wait for the paint to dry.
The outlines can be done with a paintbrush or black marker.
Step 16: The shoe should be sprayed with a shoe sealant or a waterproof spray.
You can also use spray paint.If you decide to use it, make sure it is not shiny.The paint will last longer with the help of the sealer.
Step 17: Remove the masking tape and put the laces back in.
The shoes are ready to wear.You should keep in mind that your work will be delicate.Try not to wet your shoes.
Step 18: You can choose between a white or cream shoe.
The dye is transparent.The color is already there.If you try to dye a pair of blue shoes red or pink, you will end up with purple.It's not possible to dye shoes lighter colors.Any color of shoe black can be dyed.
Step 19: Remove the laces and cover the rubber soles and toe with masking tape.
The rubber will not pick up the dye.If you want to dye the laces, you will need to take them out and dip them in the dye bath with the shoes.They will be able to dye more evenly.
Step 20: Stir in 1 cup of salt and 15 grams of laundry detergent in a large bucket of hot water.
Make sure the bucket is deep enough to fit your shoe.Salt and laundry detergent can make the dye brighter.
Step 21: Add your dye to the bucket.
Follow the directions on your bottle or packet.Liquid dyes don't need any preparation.If you want to use powdered dye, you will need to put it in 2 cups of hot water first.
Step 22: Put the shoes in the bucket.
If your shoes float to the top, you need to weigh them down.You can use jars, bottles, or sticks.They will float to the top if you do not do this.Some people find that soaking the shoes in warm water helps the dye soak in better.It can get messy with dye.If you want to protect your hands from getting stained, consider wearing plastic gloves.
Step 23: The shoes should be left in the dye bath for 20 minutes.
This will allow the dye to soak into the fabric.
Step 24: Take the shoes out and wash them with water.
If you want to get rid of the excess dye, first use warm water and then cold water.You should get the inside of the shoes as well.
Step 25: Then rinse the shoes again.
This is to get rid of any leftover dye.The inside of the shoes should be washed as well.
Step 26: Put the shoes down on a piece of paper and let them dry.
If you can, put them in a sunny spot.They will be able to dry faster.You can use an old towel or a paper bag if you don't have a newspaper.
Step 27: The tape should be removed.
You can use rubbing alcohol or a bleach pen to remove the dye from the shoes.It is possible to make a paste from equal parts of baking soda, water, and vinegar.Leave the bleach on the rubber parts for 10 minutes, then wipe it off with a damp cloth.Don't use bleach on the fabric part.
Step 28: The shoes should be put in the dryer for 10 to 15 minutes.
The heat will help set the dye.If the shoes are still damp, it will help them finish drying.