How to Cool a Grow Tent: 10 steps to take in the summer
There are a number of articles that answer specific questions about grow space chilling.There are guides on high temperature controlling, cooling grow spaces with ice, and whatnot.eval.
There should be a piece that covers everything from how to cool a grow tent to the questions that follow.We mean everything when we say it.Every grower would benefit from the one-stop article.
It took a week to do the research, to collect every issue faced by growers regarding grow tent cooling, and to provide the most real-time answers to every question found.
The best guide on grow tent cooling solution is now live.
Give yourself 10 minutes to read the entire article by drinking a cup of coffee.It will be helpful to you sooner or later.
It is cool if you have yet to build your grow space.If you already have one, a high temperature could be troubling you.Take a look at the most likely reasons for it.
Take a look at the outdoors.Mother nature gives them other things apart from the sunlight.It is the natural air flow.In case of indoor growing, it is termed as Ventilation.Plants suffer from lack of proper air flow.A higher temperature is the most important.
The greatest heat source in a grow room is the lights.There are items that emit heat.Light Ballasts, Large Pumps, etc. are examples.
I have been a grower for 2 years.I grew plants in my basement.Growing in an insulated area gave me at least 5F less temperature than the same setup in the house.
Plants start to show signs of stress when they get overheated.It results in a low flower or fruit yield.If you have to know some real-time ways to beat the heat in your grow space, go through the next sections of the article.
An air conditioner is the best way to cool a grow room.It cools the environment but also takes the heat away from the equipment that creates it.
ACs of different sizes are likely to be used by growers.Sometimes, these are labeled in terms of weight, usually on the weight of 2 to 3 tons.You can use the grow room cooling calculator to find the right size.
While many growers use portable AC units and window units, the best option is to use a mini split system.
ACs are likely to consume a lot of energy.You can't always depend on an AC unit to carry all of the cooling tasks.Continue reading for more cost-effective ways.
The most important environmental factor is the air exchange of a grow space.Proper air flow will result in a constant increase in temperature, as the heat generated inside will accumulate.
It means to have the same air flow that Mother Nature would have if the plants were outside.
First, make sure the air flow inside the grow space is regulated.There are two types of fans that can be used to do the job.A person is appointed to blow air above the plants.The other fan brings in fresh air from outside.
There are different types, sizes, numbers, and positions in the fans.You can choose the best combination based on size of grow space, number of plants, and environmental condition.
The grow fans should be maximized.Start by placing ductwork in a cool place.Next, invest some bucks after an automated controller that raises and lowers the fan speeds.
An overcrowded tent is not ideal.Every tent has a limit on the number of plants it can hold.The high temperature can be caused by too many plants.
To help plants fight heat stress, an ingenious idea is to place them on smart pots.Surge evaporation, which decreases the chance of overheating, and keeps the plants sound, can be aided by these.
Coco air is a smart pot hack that helps the tent cool down.Plants will be more resistant to heat.Some supplements help fight heat stress.
My Garden Plant is the best place to learn about the procedure of grow room setup.
The heat spikes are caused by lights.When lights act like heat sources, there are a few ways to do it.The ways are not the same.
Here are a few things you can do to reduce the heat impacts of the lights.
Raising the light by a few inches can be a temporary measure to prevent the heat impacts of lights on plants.
Some hot spots may be created by light sources at a constant place.Try to occupy a moving vehicle.The lights are transported through a curved track.The light distribution becomes uniform across a broad area.It reduces the number of issues with canopy overgrowth.It helps reduce the effects of high temperature on plants.
The daytime temperature is higher than the night one.People living in a hot climate should never run lights in the daytime.The temperature is already a few degrees higher.Run lights at night.It will keep the temperature under control.Maybe it won't let the electricity bill go up.You are saving both money and energy.
Air cooled lights are a great way to prevent lights from generating heat.They can be connected to the duct lines to move the hot air away from the bulbs.You can go for water cooled lights if you want to move one step further.They have a water pump to conserve water.A water cooled light can be used to deduce the essence of an air conditioning unit.
Each additional right-angle bend of the ducting will lower the performance of fans by 5%.If you have an improper ducting, the same thing will happen.It takes an insurance of the least number of bends to be awesome.As a rule, avoid right angles that bend.
Insulating the air inside is what ducting is about.But about the entire grow space.
The grow space needs to be insulated as well.It is equally important to place the grow tent in a place that is not affected by the warm weather outside.If you live in a place where your growing area is not fenced off, you are about to face a rise in temperature.
This isn't a solution to the cooling problem of your grow tent.When your plants are going to get toxic, this is the best thing to do.What is that?
A rise in temperature will cause the plant roots to take in more water.While roots are doing that, they are also taking more water and nutrients.The chance of toxicity will get even higher with over-consumption of vitamins and minerals.
What is the solution?Adding pure water will reduce the concentration by up to 40%.The air circulation may give you a hand.
A low level of humidity is one of the main factors behind the grow room temperature.Low humidity causes a rise in temperature.And vice versa.
Increase the relative humidity of the grow space to beat a high temperature.Plants will be able to exhale water through leaves.
A good rule of thumb is to keep the humidity high for young plants and low for mature plants.
Growing indoors is a made up system.There is a product on the market for every possible problem.There are more than one when it comes to cooling.
Every grower knows that a fan is a must.They make mistakes in finding the right grow fans.There are two types of fans for grow spaces.
The inline fans that exhale hot air and intake fresh one do provide air circulation around the plants inside.Getting a fan with a proper value is important.Proper selection of power, a number of fans, placement, and orientation will determine how effectively they can help you to prevent heat issues.
Here are some of our recommendations.
There are three types of AC's there, Portable, Split and Window AC.The different types vary from size, use, features, and price.If you are using a grow tent of 2X4 or 5X5 you will need a portable ac within your budget.When you are growing in a larger space, split AC's are the best option.
We don't think window AC is a good fit for a growing space.We have an in-depth discussion of different types of grow room AC's.
When growers have to control the grow space climate, this unique piece of kit is the one-stop solution.It is an air-con, combined with a CO2 feeder, dehumidifier, and air filter.
The split type and water-cooled type are the two types of them.The second one is more likely to be used by growers.The cooling and dehumidifying job is done automatically based on the temperature and humidity of the space.The worse part?It is too expensive.
The extra heat that builds up in a growing space is absorbed by chillers.There are two types of chillers, water- and air-cooled.Water chillers cost more, but growers prefer them.
The heart of the system is a water and a solution.The mixture works to cool the temperature.Water chillers are only used for indoor Hydroponics.
The process that follows the name sounds simple.A solution that can provide mists into the air is included.A swamp cooler fan blows air into a wet media.The grow tent environment starts to cool down as a result of the combined action.
The best way to keep a small grow tent cool is to make your own icebox.The process is very easy and it costs less than other products.The Grow room icebox is recommended.
These products keep the temperature low by cooling the air.There are other products on the market that work to avoid heat generation and don't supply cool air of their own.There is a short list.
All of these products can be used to control the temperature in grow spaces.The problem occurs when you don't know what kind of product you should spend your money on.Depending on the size of your grow tent, the type and power of each product varies a lot.
All of the posts were there.Take a bow if you have gone through any part of it.Let me know if I missed any of the points.