How To Driving visibility can be increased in the rain.
Dramatic declines in visibility can be caused by driving in the rain after dark.The best way to improve driving visibility in the rain is to turn on your headlights.Don't go near large vehicles that leave a large spray in their wake.Change your windshield wipers if they are old or deteriorated, and keep your headlights clean.
Step 1: Turn on the wipers.
If you don't have automatic wipers in your car, you'll need to manually use them to improve visibility in the rain.Slow, medium, and fast are the settings for the wipers.The slow speed is selected if the rain is light.Pick a faster speed if the rain is heavier.It is not necessary to use the high speed in low levels of rain.When driving in the rain, there is no objective criteria for determining whether you need a faster or slower speed.Pick the speed that corresponds to the rain's intensity at any given time.If you have a rear windshield, you should also use it.
Step 2: Old or brittle inserts should be changed.
There are two parts to the windshield wiper, the rubber insert and the metal blade.If you detect cracks in your wiper inserts, replace them.To improve visibility in rain, most windshield wiper inserts need to be changed at least once every three years.You should consult your owner's manual or an auto parts store for information on the size and type of the blades you need.The metal blade can be slid into and out of the inserts.If you park your car in the garage, you will probably have to replace your wipers more often than if you do it outside.
Step 3: It's a good idea to replace the windshield wiper blades.
If your blades are rusty, bent, or corroded, you should replace them as well.It is advisable to use high-quality wiper blades.If there are areas of your windshield that don't get properly wiped when you use your wipers, you'll know that it's bent.If the metal arm holding the blade is unsnapped, a new blade can be snapped in.You can get information about the kind of blades you need from your owner's manual or your local auto parts store.
Step 4: It's a good idea to keep your blades clean.
Water beading and streaking can be caused by dirty windshield wiper blades.To clean your blades, use a lint-free cloth or paper towel.Along the length of the blades, wipe the cloth or paper towel.If you need to wipe the blades with a clean area, turn the cloth or paper towel over.
Step 5: Turn on your headlights.
If you drive in the rain or at night, your headlights can help you see.It is a good idea to turn your headlights on if you are driving in the rain.There are many different settings for headlights.For the existing conditions, choose the correct one.If you drive in light rain through a dark area, you might want to use your bright headlights.If you are driving through fog, use your fog lights.
Step 6: Your headlights need to be washed.
Your headlights will not shine as bright if they are caked in dirt.When driving in the rain, this could reduce your visibility.The best way to keep your headlights shining is to wash them with soapy water.You must wash your headlights when there is no regular schedule.Give your headlights a wash if they appear less Luminous than they used to be.
Step 7: You should scrub your headlights.
A piece of wet/dry sandpaper should be soaked in cold water for a deeper clean.Put painter's tape around the perimeter of your headlights.After 10 minutes, lightly sand the headlights.The headlight should be sprayed with water.If you want to repeat the procedure, use 1500, 2000, 2500, and 3000 grit wet/dry sandpaper.You can change the direction of your scrubbing each time.If you moved side-to-side with one piece of sandpaper, use an up-and-down scrubbing method for the next.When the headlight is clean, move on to the next level of sandpaper.There is no regular schedule for deep cleaning your headlights.If you wash your headlights using the standard method, you won't get good results.
Step 8: Do not follow trucks or buses very closely.
The spray produced by these vehicles will make it hard to see in the rain.Car lengths should be kept away from trucks and buses.If you have to pass trucks or buses, do so quickly so as to minimize the time you spend behind or beside them, where you can experience spray.
Step 9: Put on some glasses.
If you drive through rain, wear a pair of sunglasses to increase your visibility.If you drive in the rain at night, you won't be able to see what's in front of you.
Step 10: The demisters should be turned on if necessary.
The temperature of the rain and the temperature inside your vehicle can affect the visibility of your windows.When driving in the rain, turn on the demisters.
Step 11: Slow down.
Slowing your speed can give you more time to think.You should be able to see the space before you pass it.To meet this visibility standard, adjust your speed when driving in the rain.
Step 12: It's a good idea to clean your windshield.
It's possible that your windshield wipers aren't strong enough to wipe away all the dirt on your car.During a rainstorm, dirt could dribble down from the top corners.The best way to get a clean windshield is to have it cleaned by a professional.When your car is dirty, clean it.Don't forget to clean your blades as well.
Step 13: It's a good idea to apply a coat of rain repellency to your car.
Rain will bead on your windshield if you don't use rain repellers.Rain will roll off the windshield.Depending on the product you use, specific directions can vary.You can simply spray the repellent on the window, then wipe it away using a circular motion.The solutions need to be applied once every six months.