Vaping can be a great way to relieve stress without putting harmful chemicals into your body.It is possible that your first filling experience will be confused by the many components of vaporizers.You need to take your vaporizer apart.When you fill up your tank, put a few drops of e-liquid on the coil.
Step 1: Remove the vaporizer's tank.
The airflow base is located at the bottom of the vaporizer.Remove the coil from inside.Don't attach the tank, top connector, and mouthpiece at the moment.Do not refill your tank if you are changing flavors.
Step 2: Each cotton hole has a drop of e-liquid on it.
The dropper should be in the bottle.Attach the dropper with your e-liquid.The coil should be between your thumb and pointer finger.Each cotton hole has a drop of e-liquid on it.You will most likely be able to put drops into about 6 holes.coil preparation preserves the life of the coil.
Step 3: The tank should be filled with e-liquid.
The access points for e-liquid can be found by removing the top connecter from the tank.The dropper part of your bottle should be against the inside of the tank.Squirt in e-liquid until it reaches the horizontal hash mark on the side of the tank.The airway is the center tube of the tank.If you accidentally drop liquid here, you may inhale the e-liquid in its liquid form.
Step 4: Do you need to disassemble your vaporizer?
Once you have filled your tank, you should put the top connection back on.To reassemble your vaporizer, put the coil back in and screw the base back on.
Step 5: Wait a bit before using the vaporizer.
Give the coil 2 minutes to saturate after you put the pieces back together.You are ready to smoke.
Step 6: The coil should be removed from the bottom.
The metal piece of the vaporizer needs to be removed.Remove the coil from the tank.If you want to switch e-liquid flavors, you need to clean out your tank.
Step 7: Attach the coil to the vaporizer with a drop of e-liquid.
If you want to put e-liquid inside the coil, you need to use the dropper on your bottle or top.
Step 8: The tank should be filled with e-liquid.
To get to the tank, you have to remove the metal bottom of the vaporizer.The dropper portion of the bottle should be against the tank.When the e-liquid reaches the max fill line, fill the dropper and empty it into the tank several times.
Step 9: You need to put your vaporizer back together.
The coil should be slid back into place after you fill your tank.Put the bottom piece back on.The vaporizer should be reassembled.
Step 10: Wait a few minutes before you start smoking.
Before you use your vaporizer, the coil needs a couple of minutes to become saturated.Go ahead and start smoking if you wait a few minutes.