How to fix a broken fiber cable is a video on the Techwalla website.

The cable can be damaged accidentally.Backhoe fade is one of the main causes of optical fiber failure.You can get the cut cable by looking for a backhoe.It will be difficult to figure it out if it is caused by moles.Because of the equipment involved, the cost to repair fiber optic cable might be a little bit more expensive.There are a few things you can do to repair a broken cable.

The OTDR is used for the measurement of fiber length.Refer to the Working Principle and Characteristics of OTDR for more information.

Fiber optic cable cutting and strippers are used in a variety of applications.

The cleaver is used to cut the fiberglass for fusion splicing and is ideal for preparing the fiber for a good end face.It's important because it works with the fusion splicer to meet the end needs.

The act of joining two optical fibers may be done using heat.The machine is to combine the fibers in such a way that the light is not reflected back from the splice.

The first thing you need to do is look for a break in your cables.OTDR is a device used by the fiber-optic technicians.The ability to send a light pulse down to the optical fiber cable is what makes it work like radar.When it breaks, it will hit your device.The position of the break is helped by it.

You should dig up the cables with the break if you know the location.The damaged section is cut with a fiber optical cutter.

You should peel the jacket to expose the fiber-optic tube if you want to use a stripper.If you want to cut yarn, use fiber optic cutting tools.

The terminal will get a clean wire strip if this step is not taken.The stripped fiber needs to be cleaned with alcohol and wipes.The fiber should not touch anything.

There are two ways to cut optical fiber cable.

If you want to make a mechanical connection, you need to connect the fiber with a quick-connect fiber.Light can be passed from one fiber to the other if the two ends are aligned.There is a typical loss of 0.2 dB.