How to fix a broken pull chain on a ceiling fan light.

You don't know how to replace the pull chain for your ceiling fan because it broke.You are correct about where you should be.The article shows you how to fix the pull chain switch.

This is an alternative way to use a wall switch.It works with a chain or string.The appliance will be turned off if one pull of the string signals on.

Ceiling fan lights use the pull chain the most.Two or multi-position can be used.

The two-position can only switch on and off functions.You can adjust the fan speeds and light intensities with the multi-position pull switches.

There are two types of switches.As you pull the switch, the first type turns on.After releasing the chain, the other will turn on/off.

The first type is no longer popular due to the system becoming inefficient and causing overheating.

Both types have a switch in the outer position, while the string has an upper position.

Ceiling fans with pull chains are usually connected to an electrical panel.This is the first checkpoint.

If you hear a humming sound when you pull the chain, the fan is probably malfunctioning.It might require more professional help to fix it.

The power supply to the fan and other wirings should be checked if you don't hear any sound.There might be wires that are damaged or loose.

Before you open the fan, be sure to check the wiring and make sure everything is okay.You can move on to other steps when you are done with all of this.

There are only two things that can go wrong with your ceiling fan.The chain might have been cut or broken.The pull switch on the inside of the fan is malfunctioning.

You can fix yourself.The steps to fixing chain or switch are almost the same.

If you want to fix your pull chain, you don't need complex tools or a lot of knowledge.

The only tool that is important to accomplish this task is this one.

You will need some help to get to the ceiling fans.

You can use furniture in a room with a high ceiling.If you don't have a step ladder, a stool, table, or chair is an alternative.

Ensuring that the fan is at eye level when you stand is important.If you have to stack furniture, make sure it is stable.

You could fall or damage a part of the ceiling fan if you aren't high enough.Please try to get as high as you can.

If you don't have a stable step ladder, you can check it out here.

A screwdriver is needed to disassemble a lot of large and small parts of the ceiling fan kit.

People tend to replace a screwdriver with a knife or scissors.This is not safe.

You will need wire snips to connect the switch to the fan.To enter the switch, you would need to strip the wire.

Three basic tools will be used to complete this process.You may need other minor tools at some point.

You will need a tester to make sure the wires are dead.

The pull switch would have been turned off and the power cut off at the circuit breaker.It is still important to double check the wires.

You may need wire nuts to hold wires together.Old wire nuts can be used if they are in good shape.Get new ones if they are not.

You will need to remove the fan and fan light housing to get the pull switch.

If you want to remove the kit, you need to turn off the fan light switch and head to the circuit breaker for your home.

The ceiling fan kit needs to be taken out before you can remove it.The light bulbs and screws hold the fan light kit.

It depends on the design of the ceiling fan you are working on.Remove anything that isn't part of the fan housing.

This is the most delicate part of the ceiling fan.After those are out of the way, you can remove the panel holding the light board.

You don't want to lose any of the removed parts, so be sure to keep them safe.

You can remove the fan housing if you want to see the old switch inside.

You need to remove the nuts from the pull chain switch when you have removed the fan light fixture.You can work on the chain switch directly if you get to the old switch.

If the problem is a broken pull chain, you should be able to see where it happened.You can get a match by taking the chain to your local hardware store.

We recommend that you get something that is longer than the last.This makes it less likely that you will have to go through this process again in the future.

The job is done once you have the new pull chain.The former one was in the same position.

You can return everything you removed from the installation after that.

If the pull chain is working, you can turn the power back on.

You need to do a check if it doesn't start working immediately.The parts of the fan are being reassembled.

You will need to disassemble the fan kit again.If you left out a connection or didn't fix the pull chain, check this time.

If the switch is malfunctioning, you have to disassemble it again.Be more thorough this time.If you missed something, take a closer look at the pull chain switch.

Is the pull chain switch damaged?You might have to go back to the store.You can get a match by removing the switch from the fan.

Take note of the wires connecting the fan and switch if you didn't make the initial installation.It might not work if you don't place the wires where they were.

You can purchase a new switch at your local store if the parts of the ceiling fan are already disassembled.

The ceiling fan might not respond after the chain is pulled if the wiring gets loose.

If you follow the steps in this article, you can fix your ceiling fan at any time.

Ceiling fans may have different designs.Pull chain switches can be found inside ceiling fans.They may be attached somewhere else on the fan.

It is possible that the problem with your fan is not with the pull chain switch.Don't try to fix it yourself in cases like this.Seek the attention of a professional.If you do it yourself, you may cause more damage to the ceiling fan.