How to fix a Brother P-touch TZe label maker tape that is broken.

If the label maker won't turn on, you should make sure the batteries are alive.The old batteries should be replaced with new AA batteries.You should use the battery replacement guide to replace them.

The upper battery terminals should be checked.The terminals should not become compressed.The batteries on the upper level should be held firmly if possible.The unit was powered on after I did this.

If the screen stays blank after you try to turn on the machine, there might be a problem with the AD-24 AC adapter.Remove the old one and replace it with a new one.

If you tried to print a label but it didn't come out or you typed something wrong, the tape cassette may be empty.The Cassette Replacement Guide can be used to replace tape.

If the screen reads "no cassette", make sure the tape cassette is inserted correctly.If there is no tape cassette, replace it with a new one.The tape compartment cover needs to be closed properly.

The cutter blade may be dull if the tape won't cut properly or it is difficult to cut the label.

The unit will jam if the cassette tape is not inserted correctly.The cutter is probably jammed if it seems stiff.We have a guide for replacing the cassette.

Make sure the tape is fed through tape guides on the cassette if the label is wrinkled or not printing properly.The tape won't print properly if it's not fed correctly.The tape feed should be under the tape guides.

Repeated use of tape can cause the blade to dull and jam.To clean the tape cutter, use a cotton swab and rubbing alcohol.See the replacement guide for the cutter blade.

If there is no text on the screen when you push the buttons, the keyboard may be damaged and need to be replaced.There is a keyboard replacement guide.

It came alive after trying 3 sets of new batteries.This thing requires more power than the batteries can provide.