How to Fix a Loud Sump Pump is part of the "Sump Pump Noises: What They Mean" article.
The noise is expected from a machine.If your sump pump is making so much noise that it is becoming a problem, then you need to get it fixed as soon as possible.It might be time for a new pump if you hear a noise from the basement pump.
Sometimes a small issue that costs little to fix can lead to a complete system replacement.There are some issues that could be causing your pump to be loud.
The installation of a spring-loaded check valve is sometimes called a silent valve, and it can be used to solve a noise problem caused by a sump pump flush.The hammering noises are kept to a minimum by this valve.
It is easy for a professional to do this and fix all your noise issues.
It is easier to notice your pump when it is running because of the noises it makes.If your pump seems to be running a lot but you aren't experiencing more water, then you need to have it looked at.Gurgling, rattling and banging noises can be heard from your pipes.
A pump that runs more than it should is going to wear out faster than you would like.If the pump is running frequently, it is likely to make noises.
A sump pump is only capable of so much.Good maintenance can extend the life of a pump but eventually it will show signs of wear and tear.
If your pump is making a lot of noise, it is a good idea to replace it with an up to date unit.The newer sump pumps have updated technology that allows them to send automated alarms and alerts.
Too small of a pump can cause problems.It's possible that your pump isn't powerful enough to deal with the water in your basement.
A pump is going to burn out.This is most likely to happen when you need it the most.Before the pump gives out, it is best to replace the underpowered pump.If your pump is loud, this is an incentive to have it fixed or replaced.
Proper lubrication is needed for the sump pump motor and lines.It is possible that your motor has not been lubed in a while.The parts that wear out faster due to grinding are the ones that don't have lubrication.
It is wise to upgrade if you have plastic pipes because they make more noise than cast iron.Plastic pipes are more expensive than cast iron.
This can lead to noise if pipes or your pump touch walls.A noise issue can be prevented by using foam insulation.Adding foam insulation around the discharge pipe can reduce noises during the pump cycle.
You should install a cover for your basin if it doesn't have one.A well-insulated cover can keep most of the noise and smells out of your basement or crawl space.
If your pump runs dry, it can make a loud slurping sound.Make sure your pump is always in a few inches of water.If the problem continues, you should consult with a service professional.The discharge lines are another area to check.Water can back up and start drinking from it.