How to fix a sewing machine handwheel is listed here.
The sewing machine has a handwheel.It can be found in both manual and electric sewing machines.The balance wheel is in the automatic machines.When you want to wind some thread to the bobbin, you need to turn this wheel.
When threading the top thread, you will use the handwheel to bring the needle up or down.The thread take-up lever can be brought to the upper position with the help of the wheel.Sometimes the handwheel can get stuck and stop the sewing.
There can be no tension in the upper thread.You may find that the thread is wrapped around the fabric.There will be many threads there.Most people think that the problem could be with the bobbin.
It is not that.The mess is caused by a lack of tension in the top thread.There isn't enough tension for the needle to pull the thread through the cloth.Rethreading the needle can be used to remedy the situation.The presser foot needs to be raised for this purpose.Carefully read the instructions for threading your machine.
Lint is a by-product of sewing.When you are stitching continuously, lint can accumulate in large quantities.Dust can get between parts of the machine.Grease and oil are used to lubricate parts.
These two could become enemies if you don't clean the machine regularly.The sticky mess will prevent the parts from moving.This is the reason why your handwheel won't rotation.
There is a small wheel in the middle of the handwheel in older sewing machines.The handwheel won't turn freely if the inner knob is locked.The handwheel will turn without difficulty if you unlocked the knob.
The inner knob will be unlocked when you turn the handwheel.You have to free the handwheel if you unlocked it.If you are using an older model of sewing machine, the first thing you need to do is turn the handwheel.
The handwheel may not turn freely if there is tangling of the threads.There can be an increase in tension.The handwheel must not be turned forcefully.The best way to remove the thread is to do it again.
Ensure that there is no excessive tension in the thread by checking the threading.You need to make sure that you did the threading correctly.If the handwheel is stuck due to wrong threading, this can help.If you still find it hard to turn the handwheel, you may have to look for other remedies.
lint is very common in sewingThere is no lint in the machine if you clean regularly.lint can accumulate a lot around the bobbin case.It can be difficult for the handwheel to move smoothly.
The bobbin case needs to be removed and the area cleaned with a brush.Special attention must be given to the bobbin sensor.Check the movement of the handwheel.You can put the bobbin case back if you are satisfied.
This is the most important step in winding the bobbin.If you want to turn the wheel for the initial winding of the bobbin, you have to release the know inside the handwheel.
If you haven't unlocked the inner knob, it could be difficult to turn the handwheel when winding the bobbin.It will become easier once you are unlocked.This is done to prevent the needle from moving when there is no fabric to sew.Turn the knob to release the handwheel.
We need to discuss how the handwheel should be moved.The handwheel should be turned in the anticlockwise direction.When you are winding the bobbin, you must turn the handwheel towards you.
It is the same when you want to change the position of the thread take-up lever on the handwheel.The sewing machine could be damaged if you turn the wheel in the wrong direction.
The timing of the machine can be disturbed when you turn the handwheel in the wrong direction.Repairs that can be very costly will be required.You can turn the handwheel away from you on rare occasions.You have to do it slowly and carefully.You must not apply force if you find it hard.
The above actions may cause your handwheel to start moving.You must take it to the mechanic if it doesn't turn after the above measures.
An electric sewing machine must not be repaired by you.If you don't know the mechanism of the machine, you can end up damaging it.
This could cause you to spend more money on repairing the machine.If you don't know what to do, you can always call the service centers and ask for a visit.It's better to be safe than sorry.
I work as chief editor, sewing machine gallery and sewing expert.I want to share my knowledge about sewing and other crafts.
The website sewingmachinegallery.com is reader-supported.Products purchased using links on this page may earn us a commission.You can learn here.