How To Get Rid of Cigarette Odor from Timber Paneling
The smell of cigarette smoke lasts for days, weeks, months and even years after a smoker has stopped.Wood will absorb the odors of cigarettes and may be a source of continuing odors for a long time after the smoking has stopped.There are a number of ways to get rid of this smell.
Step 1: All windows and doors should be open.
As much fresh air as possible should be allowed into the room.
Step 2: It's a good idea to wipe the panelling first.
It is a good idea to use plain white wine vinegar on a cleaning cloth.This should be wiped over the entire area.As well as starting the deodorizing effect, this will lift any marks, stains, grease and other remnants from the wood panelling.It isn't considered pleasant by everyone to have an odor of vinegar.Within a day, this odor will disappear.
Step 3: The panels need to be washed.
To clean the panelling, use warm soapy water, dip a cleaning rag into it, and wipe it over.It's important to wash really well.It's a good idea to wipe off any wet areas.You can use either an all-purpose detergent or a dish-washing detergent.To make sure the solution won't stain the wood, check an area of the wall that's not visible.Murphy's Oil soap is possible.
Step 4: White wine vinegar is used to wipe the panelling.
The round will increase the deodorizing effect.
Step 5: The air in the room should circulate as much as possible.
The more days you can do this, the better.
Step 6: If you've tried the above method and still can't get it to work, try one or more of the following suggestions.
Step 7: A chemical sponge is a product that you can purchase.
As you clean with it, it will absorb the smoky smell.To reach every spot, Rub the chemical sponge over the wood panelling.Change the positions on the sponge when it gets dirty.If the area gets too dirty, cut it off.Continue until the panels are clean and smell better.Ensure that the room or area continues to be wellventilated.
Step 8: If you want to make a solution, use tri-sodiumphosphate.
When you're trying to remove the smoke from your lungs, you need to use a degreaser.One gallon of warm water should be added with one ounce of TSP.They need to mix together.Wear gloves and dip a sponge into the mixture.The wood panelling should be wiped over with the sponge.Immediately follow with a new sponge that has been dipped in clean water.Allow to dry.First, test an area that can be affected by TSP.The water pool on the wood will cause it to oxidize.Before applying to the wood, wring out the application rag or scrubbing item.
Step 9: Paint over the cleaned wood panelling if it's suitable.
The smell will be sealed and the look improved.The final layer can be a sealant or gloss.Pre-painting with a TSP wash will remove the smoke and leave a clean surface for painting on.If painting isn't an option, use a varnish, clear gloss, wood veneer or wood sealant.Shellac can be a good sealant but it has strong odors so make sure you have plenty of air.It is possible to make a good sealant out of orange or lemon oil.
Step 10: If what you've tried doesn't work, call a professional.
If you want to remove smoke odors and stains after a fire, look for companies that have the tools and chemicals to do it.Before using the services, get a quote.Depending on the area and what needs to be done, these services can be very expensive.It may not be possible to remove all of the smell with a professional service.