Millions of people suffer from a variety of medical conditions that can be treated with marijuana.Medicinal marijuana is popular in certain places, but it is hard to get in others.Marijuana laws vary from state to state and often conflict with federal law.The easiest way to get medicine is to grow it yourself.Quality marijuana is an extremely difficult task and growing it may be the option for you.With some knowledge and commitment, you can grow high quality marijuana in no time.
Step 1: It's a good idea to secure an indoor space.
Marijuana can be grown inside if you grow it inside.You can grow marijuana inside to control the environment.There are many issues that plague outdoor growers, and this will eliminate them.You do not need a specific space to grow pot.You can grow your pot indoors with a little retrofitting.
Step 2: Purchase lights to illuminate a room.
Setting up your lights is the most important step in creating an environment to grow medical marijuana.A good lighting schedule and quality lights will make sure that your marijuana will grow and produce quality buds.Light-proofing your grow room is one of the things you will want to do.Purchase metal halide or high pressure sodium lights.If you want to grow a grow room, you should have at least 7000-7500 lumens per square foot.The box or manufacturer should be consulted before purchasing a light.If there is a flood in the grow room, you should install surge protectors and use GFI wall outlets.If the power goes out, consider buying a generator.Lightproof your grow room by covering all the windows with tinfoil.
Step 3: A lighting schedule can be setup.
Quality medical marijuana can only be grown with a lighting schedule.You will regulate your plant's light source because you want quality pot.Do not stray from the schedule.The quality of your buds may be undermined by straying from your lighting schedule.You can put your lights on a schedule if you buy timers.Your initial lighting schedule will be 18 hours.During the dark period, do not enter the room.During the dark period, don't let any light in the room.
Step 4: Proper temperature control is provided.
Plants need fresh and clean air to thrive.You need to make sure that your plants have fresh and clean air wherever you grow them.You have to make sure that the temperature and relative humidity of your grow space stays constant.Make sure your grow room has good circulation to allow fresh air in and out.Installation of specially designed ducts will allow you to move air in and out without allowing sunlight to affect it.Installation of bent pipes in a window opening and covering the left over space with plywood and/or other materials is the cheapest way to do this.Fans can be used to promote circulation.Make sure your heating and cooling system is running so it can provide cool and hot air to the space.Since your lights generate a lot of heat, air conditioning might be the most important.Make sure you have a constant temperature.It depends on the strain of marijuana and the climate.The growers like to keep the temperature between 72 and 75 degrees when the lights are on, and between 80 and 85 during the dark period.
Step 5: A good soil mix is needed.
Quality medical marijuana can be grown in soil next to lighting.It's important to get a really good soil mix.Don't pay too much out here.The quality of your product will be determined by the soil quality.If you don't have water in your soil, it could hurt your plants and roots.Sand, sponge rock, or pearlite should be in the soil.Half of the unfertilized potting soil should be used with a mixture of fox farm ocean forest soil.This mixture will allow the root of the plant to get the food it needs.Good fertilization can be included in the soil.Depending on your taste and budget, the type ofFertilizer you choose can vary.
Step 6: You can plant marijuana seeds.
Plants are the first step in growing marijuana.There are a number of things you need to do in order to make sure your seeds grow.It's a good idea to bury your seeds less than an inch from the surface.Provide water to the seeds after they are buried.Don't flood the soil.It should be wet several inches down.Extra seeds should be planted to make sure that seeds don't die soon after germinating.
Step 7: Water your plants.
It's a good idea to water your marijuana plants as often as you can.Your quality will suffer if you don't water your plants enough.Plants can suffer root rot if you water them too much.Wait until the top of your soil is dry to about an inch deep to water properly.Water your plants until the water runs out of the container.Wait until the top of your soil is dry.It's possible to set up an automatic watering system that works on a timer.It will save an experienced grower a lot of time.
Step 8: Tend to your plants.
The vegetative state is the second growth phase after germinating seeds.Depending on the variety of the plant, the vegetative state lasts from 2 weeks to 2 months.Plants will develop and mature during this time.A minimum of 3 weeks is required for most strains.By how long you allow your plants to stay in a vegetative state, you can decide how big you want them to be.Depending on the size of the plant, give it enough water.It is important to give your plant enough fertilization if it is not already present in the soil.
Step 9: Itduces flowering.
When your plants are large enough that you want them to be, you need to induce flowering.The major change in the lifestyle of your plants is when they will start to produce flowers and buds.Light can be reduced from 18 hours to 12 hours a day.Light can't enter the room during the dark hours.bud and flower development on the plants will begin in about two weeks.This is the beginning of the flowering stage.After 12 hours of darkness, harvest.
Step 10: It's a good idea to monitor the pH often.
Ensuring you are growing quality medical marijuana is dependent on the plant's pH.Marijuana does not thrive in acidic soil.To make sure the acidity is not too high, you should monitor the pH of your soil often.The pH needs to be tested every 2 to 3 days.Make sure to test your pH every day if you are going soil-less.If you use traditional soil your target pH is between 6.0 and 7.0.If you are going to use a soil-less method, your target pH is between 6 and 6.5.Use a pen to test the pH.
Step 11: Make sure your pH level is adjusted.
After you have tested your pH level and determined that it needs to be adjusted, you can take measures to tune it.The best environment to grow quality marijuana can be created by adjusting the pH.Purchase a solution to adjust the pH.Do you know the water's pH level?Add enough solution to the water to get the desired pH.After a few days, water your plants with the treated water.If your water is out of the desired range, continue adding solution for as long as is necessary.
Step 12: Take care of your plants.
As the flowering stage comes to an end, you will need to prepare yourself to flush your plants.If you want to provide your plants with an excess of pure water, you need to stop adding Nitrogen andFertilizer.The purpose of this is to make sure that the soil and/or medium you are growing in doesn't have any nitrates in it.Your plant will be forced to rely on reserves.The final product will be better because of this.2 weeks before harvest, start the flushing process.For the rest of the plant's life, don't add any more food or water.There is water at the top of the soil if you add enough water.It should be left at the bottom of the container.After all of the water leaves the container, repeat this step a second time.You should swap out the old water for fresh water if you are growing Hydroponics.
Step 13: Begin the process of harvesting.
The harvest process needs to be done perfectly two days before harvest.Quality marijuana will be ensured by this.Two days before harvest, conduct another flush.It's important to do this twice.One day before the harvest, stop adding water.If you want to make sure your soil is completely dry before harvest, adjust the process.
Step 14: You should harvest your buds.
It will be time to harvest once your plants have budded.Make sure you have the time to harvest and the space to do what needs to be done because it is a very long process.The plant should be cut from the root.If you need to, you can cut larger branches.It's important to leave at least two large branches.The leaves are being removed.They would have died a week or two before this.All twigs, stems, leaves, and anything without buds are removed.
Step 15: Cure your buds.
After harvesting your plants, you need to cure them.The curing process needs to be done correctly.If you don't cure properly, your buds could become mold, or just dry out completely.Hang your large branches and plant for a couple of weeks.As they dry out, remove smaller buds.You don't want them completely dry, but maybe half-dry.The room you cure in should be about 70 degrees.The room should have about 50 percent humidity.After removing the buds from the branches, make sure to put them in a container.Fresh air can be allowed in when the container is open several times a day.Reseal the container after use.Your buds will be ready after a few days.
Step 16: You can find laws in your state.
You need to know the specifics of the laws governing medical marijuana growth and consumption in your city or state before you start growing it.Laws vary from state to state and city to city.Can you grow marijuana at the location you want to grow it?Marijuana can't be grown close to a school or other public building.It is okay to grow pot at your location.Know the number of plants you can grow as a medical marijuana grower.The numbers are different from state to state and city to city.If you grow too much, you can be fined or imprisoned.If you have questions, contact your local government, police department, or alcohol and marijuana control authority.
Step 17: If necessary, get a permit or license.
Do you need a permit to grow marijuana?Before moving forward, you need a permit or license.Penalties may include jail time if you grow without a permit.
Step 18: Understand federal law.
Know how federal law applies to medical marijuana before you grow it.Medical marijuana may be allowed in your city or state, but federal law may disagree with it.Federal law prohibits the use of marijuana for medical purposes.Federal law prohibits the growth of medical marijuana.If you cultivate or consume medical marijuana, the Justice Department can prosecute you.
Step 19: Know about distribution.
You need to understand the laws regarding the distribution of medical marijuana in your jurisdiction and at the federal level after you have learned your local and state laws.Even if they have a prescription, you can be prosecuted for distributing medical marijuana to others.A doctor's prescription is required to purchase medical marijuana in many states and cities.If you distribute your medical marijuana to others, you are more likely to be prosecuted by the federal government than if you use it for personal use.The risk of prosecution is high if you or someone else brings marijuana across state borders.