How to install aluminum siding that is maintenance-free under a house.

The underside of an elm is covered with soffit.The location of the inside and outside corner posts will be determined by the installation of soffit.Before the final course of siding is installed on the wall, it is necessary to complete the soffit.

It is easy to install vinyl soffit from wall to wall.Similar to vertical siding, fit panels are similar.Solid panels and combinations of the two are produced by manufacturers.

Prepare the job in advance.If you want to apply re-siding, make sure to nail down any loose panels.When necessary, check the surfaces for straightness and fur.Surfaces should be straight and uniform.

The procedure for installing soffit depends on the construction.There are two types of eaves.

The peak of a gable is where the transition occurs.Each accessory has an individual piece of soffit on it.To match the angle of the gable's peak, bend a section of soffit using a field brake.

In a remodeling project, the same procedure is used to install soffit as it is in a new construction project.The installation of the J-channel is the major difference.They were 71 and 72.

The procedures used to install a porch ceiling are similar to those used for soffit.The procedures vary depending on whether the installation is a new construction or a re-siding project.

Basic guidelines for vinyl siding installation can be found in this manual.The Spanish version is also available.