How to install Duralast Brake Pads is a Yahoo Answers topic.
Duralast makes replacement brake pads for many vehicles.Each vehicle model's braking specifications are formulated into the brake pads.The process for installing the brake pads is the same no matter the make or model of the vehicle.The inboard and outboard sides of the rotor have two brake pads.They are held in place by a caliper.The installation process will take 10 minutes.
Duralast makes replacement brake pads for many vehicles.Each vehicle model's braking specifications are formulated into the brake pads.The process for installing the brake pads is the same no matter the make or model of the vehicle.The inboard and outboard sides of the rotor have two brake pads.They are held in place by a caliper.The installation process will take 10 minutes.
The passenger side wheel has nuts on it.The jack is behind the wheel on the frame rail.The wheel can't be raised until it hangs off the ground.The nuts need to be removed.The wheel needs to be pulled off.
To get to the inboard side of the caliper, you need to spin the steering wheel clockwise.
The bolts securing the caliper to the rotor need to be removed.The caliper needs to be pulled off.
The Duralast brake pad should be inserted into the caliper.If the drive shaft presses the inboard Duralast brake into the caliper piston, it will cause it to crack.The inboard Duralast brake pad needs to be flushed with the caliper.Remove the piece of equipment.
The Duralast brake pad should be put in the outboard side of the caliper.The pads should be in the slots of the caliper.