Paper clocks are fun to make.They can be used as props in a play or skit.You can use them to teach.The article will show you how to make a simple clock using paper, a brad, and imagination.
Step 1: You should gather your supplies.
The clock is made out of paper and won't be able to move its hands on its own.You will need a paper or brad to move the hands.Here is a list of what you will need.
Step 2: There is a white paper plate.
You can't see the numbers on a plate with pictures on it.Don't worry, you can color the plate later.A regular plate can be used to trace a circle onto a piece of paper.Use the circle instead of cutting it.
Step 3: The numbers 1 to 12 should be written on the rim of the plate.
If you have a narrow rim, write the numbers on the plate.Make the spaces between the numbers the same as you can.It's a good idea to write the numbers with a pencil.You can draw on the numbers with a crayon or marker.First you should write the 12, 3,6, and 9.You might be able to keep things even.You can use foam or sticker numbers.
Step 4: Cut out two arrows from a piece of colored paper.
One arrow needs to be showered more than the other.Make sure the bigger arrow is able to reach the numbers.The minute hand will be the big arrow and the small hand the hour hand.
Step 5: The plate and arrows can be decorated.
If you want to change the color of your clock, now is the time.The clock can be colored with crayons, paint, or markers.You can add something to it.If you put too much on it, you will not see the numbers.Before moving on, you need to let everything dry.
Step 6: The clock has a hole in it.
You can use a pen, a toothpick, or a wooden skewer.Ask an adult to help you with this step if you are a child.If you want to find the center, flip the plate over.The clock has an X on it.The clock's edges should be touching the points of the X.The center of the clock is the X.
Step 7: There is a hole in the bottom of the arrow.
If you want to punch the hole through both arrows, line up the bottom of the arrows first.This will make it better.You can use a hole puncher.If you don't have a hole punch, you can poke it with a pen.
Step 8: The clock has arrows on it.
Make sure the hole in each arrow is in the same place as the clock hole.
Step 9: The brad needs to be stuck through the holes.
The back of the clock should show the end.
Step 10: The cock should be turned over to flatten the prongs.
To flatten the prongs against the plate, separate them first.You can use a butter knife.An adult can help you if you are a child.Brads are very sharp.
Step 11: You should use your clock.
If you want to see the numbers again, turn the clock back over.The arrows can be moved around.The paper will rip if you pull or tug too hard.
Step 12: Glue a piece of ribbon to the back of the clock.
If you want to make a loop, take a few inches of ribbon and fold it in half.To keep them together, tie the ends together.You can see the back by turning the clock over.The hot glue should be close to the top.Let it dry after pressing the ribbon down.Glue guns can get very hot.An adult can help you with this step.The ribbon can be stapled to the plate.
Step 13: You can add a pendulum to your clock.
A long, skinny piece of yellow paper can be cut.Attach the circle to the bottom of the piece of paper.Wait for the glue to dry and then poke a hole.To open the brad, turn the clock over so that the back is facing you.Put the prongs through the hole and flatten them again.You can swing the pendulum by turning your clock back over.
Step 14: Glue the clock to the paper.
If you get glue on the brad, you may not be able to turn the arrows anymore.Cut a wave-like shape from the brown paper and place it on the wall.The clock will look like a grandfather clock.Combine this with the swinging pendulum.
Step 15: Before you write the numbers down, you should paint the clock face.
You may need to re- write the numbers if you want to paint the clock.Some of the paint is translucent.
Step 16: Some glitter glue is used to outline the clock and arrows.
You can cover the clock with glitter if you can't find glitter glue.The glitter can be removed from a sheet of paper.The glitter can be funneled back into its container by using the paper.
Step 17: Make the clock hands different colors by labeling them.
You can write on the little hand and the big hand.It is possible to cut the hands out of two different colors.
Step 18: The rim of the paper plate should be painted a different color.
This will make your clock look realistic.The colors that will work for this are black, brown, blue, and red.Try using gold or silver paint.
Step 19: The numbers should be decorated.
You don't need to use marker to write the numbers.Try using foam letters.You can use a silver or gold permanent marker.I, II, III, IV, V, VI, VII, VIII, IX, X, XI, and XII are Roman numbers.Continue around the rim until you reach the "I" position at 1 o'clock.The 12 should be at the top of the clock.