How to make waterbed sheets is a topic of discussion.

Sleeping on a waterbed is a new experience.Waterbed owners complain that using the right sheet on the waterbed is important.The sheets must be made longer because waterbeds are longer.The design of waterbed sheets helps them stay on.The corners of the waterbed mattress have pockets sewn into them.There are flaps on the sides of the mattress.

Cut two pieces of fabric.You can use cotton or flannel.Waterbed sheets are 72 inches by 84 inches for king size beds.There is a 1-inch hem on all four sides.

Turn the fabric under and put it in place to create a 1-inch hem.Stitching along the length of the hemlines is done with a sewing machine.Iron the seams after removing the pins.

Attach the top sheet to the bottom piece by piece.The top sheet should be on the floor.The bottom sheet should be on the top sheet.The unhemmed edges should be pinned together.1 inch up is how long it will take to sew a stitch across them.The sheet should be on the bottom.The sheets should be on the same side.The seam should be irond flat.

Cut out four triangles from another piece of fabric.Hem the edges of the triangles.To expose the bottom sheet, pull back the top sheet.If you fold the top sheet in a certain way it will be out of the way.There are four corners of the bottom sheet.Place them at the edges.The triangles should be left open.

The space between the inside corners of the triangles should be measured.Two pieces of fabric should be cut to fit the measurement.Hem is 1-inch on all four sides of the fabric.Attach one long side to the other side of the sheet.To help hold the sheet in place, these flaps are used.