It's easy to create supplemental income by driving for Uber.You can make your own schedule and drive when you want.The next step is to have your vehicle inspected.Basic safety and mechanical features are the focus of the 19 point inspection process.If your car passes the inspection, you will be approved to drive for the ride-sharing service.
Step 1: Put your car horn to the test.
When you press your horn, it should make noise.If the car horn isn't making noise, there are a couple of ways to fix it, and you can read the owner's manual for more information.If the problem is not the fuse, look for the light on the dashboard.It could mean the horn is malfunctioning.
Step 2: Make sure your mirror is intact.
There should be no cracks in the mirror.If you need to replace your mirror on your own, consider it.The mounting button is attached to the mirror and should be removed first.Either put it on the mirror's arm or slide it.Apply heat to the area where the old mirror used to be.You can use an activator spray on the inside of your vehicle where the new mirror is going to go.Apply glue to the mounting button and press it onto the windshield for 60 seconds.Attach the mirror to the mounting button.
Step 3: Take a look at your exterior side mirrors.
You should be able to adjust the side mirrors.It is recommended that your side mirrors are free of cracks.
Step 4: It's time to test your speedometer.
Take your car on a test drive to make sure that your speedometer accurately rises and falls as you accelerate and decelerate.
Step 5: Take a look at the seats and seat belts.
Front seats should be able to move.Buckle and unbuckle seat belts.
Step 6: Look at all the windows.
The windows should be able to roll.The rear window should not be damaged.
Step 7: Make sure the doors and locks are working.
You should be able to open and close doors and lock them.
Step 8: Check out the windshield wipers.
The wipers should be working.Check that washer fluid is topped off when you test each speed of the windshield wipers.If you don't improve the clarity of the windshield, you should replace the blades.There are auto parts stores that sell blades.Lift the blade off the windshield and turn it to the right to replace it.Unhook the blade and then hook on a new blade in its place.
Step 9: The car lights should be checked.
The headlights, stop lights, and turn signal indicators need to be working.While you test the lights, have a friend stand outside the car and tell you what works and what doesn't.
Step 10: Look at your car.
Make sure the front and back bumpers are undamaged.Minor body damage is normally ok, but dents and scratches larger than a baseball may cause a car to fail inspection.
Step 11: Check the tread on your tires.
You can check tire tread with a U.S. penny.If you put a penny on your tire, the tread needs to reach Lincoln's head on the penny to meet the requirements.Before you have your car inspected, make sure your tire tread meets the requirements.
Step 12: There is a business that focuses on inspections.
Many mechanics and body shops hope that your car will fail the inspection so that they can sell you expensive parts.The main focus of the center should be to do inspections for the ride-sharing service.
Step 13: You can find an inspection center near you.
To find a location, go to the website.Go to the tab that says get an inspection.You can find a list of approved inspection centers on this page.There are activation centers and Greenlight Hubs that offer free inspections.There will be a list of approved inspection locations if there is not a Greenlight Hub or activation center in your area.At other businesses the inspection could cost up to $30, so it is best to go to an activation center or Greenlight Hub.Check to see if you need to download the form when you pick your inspection center because some activation centers and Greenlight Hubs are paperless.
Step 14: The right documents should be brought.
You need a current driver's license, vehicle registration, proof of car insurance, and an inspection form.The inspector fills out the form during the inspection.
Step 15: You can schedule an appointment.
You can book your appointment online after selecting a Greenlight Hub or an activation center.It's a good idea to schedule in extra time as there could be a line of people waiting when you arrive.
Step 16: The inspection form needs to be uploaded.
If you pass the inspection you will be able to submit the form to your application.Greenlight Hubs should be able to help you with uploading your form.You can take a picture of the form and then submit it.After passing your vehicle inspection and uploading your inspection form, you should be approved to start driving.