How to remove a car antenna from your car is explained in the video.
After a few years, any car's antenna starts wearing out, whether it is telescopic or fixed.It bent over after a while.You can't listen to the car radios if you have this type of antenna.The bent antenna will take away the overall appearance of your car, no matter how well maintained it is.The old antenna needs to be removed or replaced for the sake of clear sound and perfect looks.The step by step guide on how to remove the car antenna can be found in this article.It is simple to remove and you don't need anyone's help.
You will need a screwdriver, pliers, an electrician's tape, and a new antenna.Before starting the process, make sure you gather all the tools and materials.It will save you a lot of time.
It is important to know about your car antenna type before you start the removal process.The two most common types are Pillar Mounts and Fixed Masts.Go further if you know about the type.Both of these types are easy to fix.The replacement units should be purchased from any automobile shops near you.You can get them for between 15 and 25 dollars.
The back of the radio has a cable that runs from the antenna to it.Most of the time, you will find it behind the dashboard.Do you know if it is an extension cable or one cable running the entire length?This scenario works differently than the other one.Plug the wire at the extensioncoupling if it is an extension.Remove the coaxial cable from the back of the radio if it is one cable.
While working around the antenna, cover the car's surface with a clean cloth to protect it.The color and finishing of the vehicle can be secured with this step.Use a screwdriver to lift the rubber grommet after you place the fabric.Let me tell you where to find a rubber grommet if you don't know what it is.The antenna has a rubber part around it.Check the rubber piece thoroughly.Take it off of the antenna.
Take the help of a screwdriver to loosen the screws.The antenna mount may have had some screws placed on it.Lift the mount off of the vehicle and look under the dashboard.The antenna is mounted to the car.It is on the inside of the vehicle.
Once you are done with the steps, you can start undoing the sockets that hold the antenna to the vehicle frame.You can complete this task with a crescent wrench.It will be great if you can get someone to hold the antenna on the outside of the car.It will prevent the loosen antenna from falling on the car.Even if you don't have anyone around, you can get rid of the sockets by protecting the antenna and car's surface with a clean cloth.
If you want to remove the antenna from the car, just slide the sockets out of the cable.The only thing you have to do is pull the cable through the hole.
Isn't it simple?It is a question of 15 to 30 minutes, and you are ready to go!I hope the article explains how to remove a car antenna quickly and easily at home.Stay safe, be happy, and learn new things.Don't be dependent.