How to Seal Stone Natural, Tile with Aqua Mix Penetrating Sealer.
The industry's leading collection of technologically-superior, easy-to-use, professional grade subfloor preparation products designed for all types of floor coverings is called CustomTech.
Quality starts from the ground up.Preparing your surface is the most important part of any tile or stone installation.One source for the needs of virtually any job is offered by Custom Building Products.
There is a precise tile and stone setting.CUSTOM® offers the broadest line of tile and stone setting materials in the industry to give the exact performance your job demands.
The tile grout has good performance and color.Look for tile grout that is rock-solid and consistent.Our hard, dense joints are easy to work with.
Protect your tile and stone with stains.Permanent stains can be left on tile or stone.Protect your surface from both oil- and water-based stains.
The #1 Contractor preferred manufacturer of Sealers and Cleaners, we provide professionals with the right tools and solutions.
You can find a better choice in high-quality profiles and transitions.Stunning designs can be created in tile and stone.A complete line of edge protection profiles.They integrate with most field tile to increase design flexibility and minimize safety risks.
It demands the best.SuperiorBilt® Tools are used for tile, stone and floor covering installations.
An economical, no-sheen, natural look, water-based penetrating sealer is designed to resist stains.May also be used as a primer.The ability to allow moist vapor transmission.Can be used as a caulking agent.
Unglazed tile, porcelain, clay, concrete, brick, masonry, and grout are all natural stone surfaces.For both interior and exterior use.
The surface should be clean and dry.It takes 48 hours for new installations to dry.The surrounding surfaces should be protected.The product should be tested in an area with good results.
It is possible that you may be harmed if you sneeze.It is possible to irradiate eyes and skin.Wear eye protection.Do not spray or breathe in fumes.There is a substance with the letter K in it.If you have eyes, flush them with water for at least 15 minutes.If on the skin, wash it with soap and water.Remove the respiratory tract if it is irritated.Seek medical attention if irritation persists.Do not vomit if swallowed.Seek medical help.
During installation, porous tile and stone can be stained.It will be easier to remove the grout when the tile is sealed.After tile has been bonded for a minimum of 24 hours, or before installation, apply a sealer according to directions.Wait at least 2 hours.
Before using, read the entire label.Use either a sponge or brush.Allow it to penetrate for a while.After each application, wipe the surface dry with clean, dry cotton, paper or microfiber towels.Additional applications may be required for porous surfaces.If the surface is completely sealed after 2 hours, it's time to conduct a test.Apply an additional coat if it hurts.
Do not use cleaners that contain ammonia, acids or bleach.Use an appropriate neutral cleaner.Testing of sealed surfaces is recommended by tile industry experts.The water should be applied on the surface.An additional application of sealer is needed if it soaks in.
Send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA, for the applicable limited product warranty at www.custombuildingproducts.com/product-warranty.The product is manufactured under the authority of Custom Building Products, Inc.
Depends on the type of stone and the method of application.