How to shorten Levolor blinds with LEVOLOR instructions.

Are your blinds long?You can shorten mini blinds in a few easy steps.

How to shorten Levolor trim and use corded wood and faux wood blinds.You will need a flat screwdriver, needle nose pliers, and scissors for this job.Step 2: Select the slat that is even with the windowsill or slightly below it after installing the blind.The new bottom slat will be here.The smooth lift cords are one of the four chords.Pull the lift cord out of the way and cut the ladders with the other ladder cords.The left cord will support the slats as they fall to the bottom.The slats will fall away if you cut the left cord below the new bottom slats.The last two slats need to be removed.If slats are damaged in the future, save some unused slats.Plugs from the underside of the bottom rail will make your blinds look like this.The lift cords should be pulled through the bottom hole.Adding another knot for extra security is a tip.The excess cord needs to be trimmed.Remove excess ladder cord from the hole.Stuff the ends of the ladder into the holes.Remove the plug from the bottom rail and secure the ladder cord.The cords should be in the plug notch.Levolor has new perfectly sized blinds.

How to shorten Levolor trim and use corded wood and faux wood blinds.You will need a flat screwdriver, needle nose pliers, and scissors for this job.

Step 2 is to find the slat that is even with the windowsill or slightly below it.The new bottom slat will be here.

The braided ladder cords and the smooth lift cords are in the fourth step.

There are two slats below the new bottom slat.Pull the lift cord out of the way and cut the ladders with the other ladder cords.The left cord will support the slats as they fall to the bottom.

The slats will fall away if you cut the left cord below the new bottom slats.The last two slats need to be removed.If slats are damaged in the future, save some unused slats.This is what your blinds will look like.

Pull the bottom rail free from the excess slats and use a needle nose pliers to get the lift cords out of the rail just below the new bottom slat.

The lift cords should be pulled out at the last loops on the ladder.

Lift cords have holes on the front and back of the rail.The lift cords should be pulled through the bottom hole.Adding another knot for extra security is a tip.The excess cord needs to be trimmed.

Remove excess ladder cord from the hole.Stuff the ends of the ladder into the holes.Remove the plug from the bottom rail and secure the ladder cord.The cords should be in the plug notch.