They can get greasy and grimy very quickly because they are an essential part of day-to-day life.It is important to keep the pads on your nose clean while you clean your glasses.If you know how to clean your nose pads and the right way to replace them, you can have your glasses sparkling clean again.
Step 1: You should wash and dry your hands.
It will be easier to clean your glasses with clean hands.Before touching your glasses, wash your hands with soap and warm water.
Step 2: To clean the face of the nose pads, use a pre-moistened alcohol wipe.
If you want to clean your nose pads more quickly, small alcohol wipes should be available at your local pharmacy or office supply store.Rub the nose pads to make sure they don't get wet.
Step 3: You can use the alcohol wipe to clean the area between your nose pads and frames.
The section needs to be cleaned regularly.To clean around this section, use the edges of an alcohol wipe.If the edges of the alcohol wipe are still clean, you can use it for this step.If you don't have a clean alcohol wipe or want a little bit more control when cleaning hard to reach areas, you could use a cotton swab dipped in rubbing alcohol instead.
Step 4: To clean your glasses, soak them in warm water and soap.
Stir in a few drops of hand soap by filling your sink or small bowl with warm water.Put your glasses in the water for 10 to 15 minutes to help remove dirt and grease.It's possible to soak your glasses for a long time, even overnight, because of the exposure to water and changing temperatures.
Step 5: Use a microfiber cloth to dry your glasses.
To dry your glasses, use a soft cloth and be careful not to smudge the lens.Water can get trapped in your glasses if they are not dry.You can wait for your glasses to dry.It will prevent the streaks from coming from cloth-drying, but it will take a long time.
Step 6: You need to wash and dry your hands.
Your hands will accumulate a thin layer of oil and dirt over the course of a day, which can be transferred to your glasses as you try and clean them.If you don't want your glasses or nose pads getting on your hands, use soap and warm water.
Step 7: Remove the nose pads from your glasses.
Detaching your nose pads from your glasses will allow you to clean them more thoroughly.Carefully remove the nose pads from the screw holding them in place.As you clean the nose pads, make sure to keep track of the tiny screws.They can be hard to replace.The nose pads on some glasses are attached to the frame.You can skip this step if you can't detach your nose pads.
Step 8: Use soap and warm water to clean your hands.
A small glass of warm water and a few drops of hand soap can be used to make a simple cleaning solution.Without using a stronger solution such as rubbing alcohol, this will give you glasses a thorough clean and remove any green gunk.It's a good idea to use hand soap to clean your glasses.It's possible to use a dishwashing liquid instead of hand soap.
Step 9: You can dip a toothbrush or cotton bud into the solution.
You can lightly scrub your nose pads to remove dirt, grease, and grime without damaging the glasses.The cotton bud or toothbrush's tip should be soaked in the cleaning solution.
Step 10: The nose pads need to be brushed.
Start by lightly scrubbing the nose pads.When dirt and oil are visible, dip your cleaning tool into the solution to clean it.If you are cleaning the nose pads while they are still attached to the glasses, be careful not to brush the lens at all.They are very difficult to repair and scratch.
Step 11: Rub alcohol for a deep clean.
Rub alcohol on the nose pads of your glasses.Rubing alcohol at a time will prevent damage to your glasses.If you get alcohol on your glasses, it can damage them.If you have removed the nose pads from your glasses, you can use rubbing alcohol to soak them.Before removing, rinsing, and drying, leave them to soak for a minute or two.
Step 12: The nose pads should be dry.
To clean the nose pads, use a soft cloth.Make sure to dry your glasses and face thoroughly.Do not use a paper towel, cloth or your clothing to clean or dry your glasses.lint and dust can be left behind by these.
Step 13: Attach the nose pads again.
Attach the nose pads to the frame of your glasses with the same screws and screwdriver.If you see smudges as you handle the glasses, wipe them away.
Step 14: If you can't get your nose pads clean, you should replace them.
Over time, your nose pads may wear down and stop being able to be cleaned.If you notice this or just want a new pair of nose pads, you should replace them all.
Step 15: Replacement nose pads are the same size and shape as your old ones.
There are different sizes and shapes of nose pads.If you want to find nose pads that match your current ones, ask your local eye specialist.They can be part of a complete nose pad repair kit.To find the size of a nose pad, you need to measure along the longest part of the pad.The sizes are usually listed in millimeters.Replacement nose pads come with all of the tools you need to replace them, including a screwdriver, new screws, and a magnifying glass.The process can be streamlined and easy to repeat in the future.
Step 16: The old nose pads should be removed.
The nose pads should be facing towards you if you hold your glasses.The nose pad is held in place by a small screw.Remove the nose pad from the screw.The snap-on nose pad is attached by a screw.To remove the old nose pads, use a flathead screwdriver.They should leave easily.The same screws can be used to attach the new nose pads, but make sure they are functional before doing so.There are signs of damage to the threading and head.
Step 17: Attach the nose pads.
The mount on your glasses needs to be put on the new nose pads.Attach the screw to the pad and use the same screwdriver to tighten it.If you damage the head of the screw as you tighten it, it will be harder to remove it.If you have snap-on nose pads, place them on the mounts on your glasses and push until they click into place.If you can't get the nose pads or screws into the right place, use a small pair of tweezers to shift them around.The flat edge of the D faces should be away from the face if you have D-shaped nose pads.