How To There is a way to make a beacon in the game.
They are symbols of status and prestige in the game.Only the best players have them since they require a lot of expensive materials and can only be obtained by defeating the Wither.The steps below are for the challenge.This article will show you how to build a tower for a beacon.
Step 1: Know the layout of the beacon.
A beacon is a three-by-three, one-block high square base of at least iron blocks with a beacon unit placed on top of it.You need an additional square base of five by five, seven by seven, and nine by nine per power level to enhance your beacon's power and range.You need a minimum of 81 iron ingots to craft the base of a beacon.
Step 2: The necessary materials need to be gathered.
You will need the following items to craft a beacon.You can use emeralds, gold, or diamonds, but they are not the same as iron and have no effect on the beacon.Water hitting lava creates obsidian.You can find it in caves.obsidian can be mined with a diamond pickaxe.You can use this to make glass.Pick up the star that the Wither dropped.The Wither is very difficult to kill for lower-level players.Coal or wood will work.You will need this for your furnace when you make glass and iron bars.
Step 3: You should melt your iron Ore.
Open your furnace, place all 81 iron Ore pieces in the top square, and place your fuel source on the bottom square.Once 81 ores have been created, you can return them to your inventory.In the game, you can tap the top square, the iron Ore icon, and the bottom square.You can press or select your fuel on consoles.
Step 4: You should melt your sand.
Put the sand blocks in the furnace, replenish the fuel, and then get the five glass blocks when they're done.
Step 5: You can open your crafting table.
Click the PC, tap the PE, or face the table if you want to press the left Trigger.
Step 6: Iron blocks can be created.
Place nine iron bars in each grid square, then click the stack of iron blocks to move them to your inventory.Simply tap the grey iron block to select it, then tap on the right side of the screen nine times.On consoles, scroll over to the far-right tab, select the magma block, then scroll down until you find the iron block.
Step 7: Take the beacon unit and make it your own.
If necessary, place one obsidian block in each of the bottom grid squares, the Nether Star in the center grid square, and one piece of glass in all the remaining empty squares.When the beacon appears, move it to your inventory.You can make the beacon yourself.Just tap the beacon icon, then tap.You can find the beacon tab on consoles.
Step 8: There is a place where you can put your beacon.
If you want your beacon to be close to your home, you need a flat spot.
Step 9: The iron blocks should be placed on the ground.
Three rows of blocks create a nine block total base.
Step 10: Put your beacon unit there.
The middle iron block should be selected after selecting the beacon unit.Almost immediately, the beacon should light up.
Step 11: Add more layers to the unit.
You can add a 25-block base directly below the three-by-three one if you want to increase the beacon's power.You can add a seven-by-seven, 49-block base below the five- by-five.The base of your beacon can't be larger than nine blocks.
Step 12: An effect mineral can be found.
You will need at least one of the following to change the beacon's effect.
Step 13: The beacon should be selected.
To open it, right-click the beacon, tap it or press the lefttrigger on your controller.
Step 14: You can choose an effect.
You can choose the effect that you want from the beacon.The claw icon can be found on the left side of the window.It makes you run faster.The pickaxe icon is on the left side of the window.You mine faster because of this.You'll be able to equip more effects if you have more levels in your beacon tower.
Step 15: An effect mineral can be added.
There is an empty box at the bottom of the beacon's window.The mineral can be found in the upper- left side of the screen.Select the mineral or press on consoles.
Step 16: Select the checkmark.
There is a green icon at the bottom of the beacon's window.It will apply your effect to the beacon.