How to use an IR extender to control your tv without a line.
You can bridge the gap between your Smart Touch Remote and your cable box with the IR Extender cable.The IR Extender cable allows you to control your cable box with the Smart Touch Remote instead of using the cable remote.
What is the benefit of using the IR Extender?Shouldn't you use your cable remote?What sets the cable apart?You can use the Smart Touch Control.Edge is arguably a better browser than the built-in android option, as it allows the user to use its touchpad, voice control and other features, and is much superior to your standard cable remote.
The biggest advantage of using the Smart Touch Control is that you can use it with a lot of different devices.
The IR Extender works with an IR sensor.The IR signal will always reach the right device.
Devices that are stashed away in your cabinet can be worked on by the IR Extender Cable.
Every piece of technology has its own set of drawbacks.It is good to know the people who make this type of cable.
The IR Extender cable needs to be close to the remote in order to work.External devices need to be connected to the TV.
The IR Extender is not good at dodging obstacles.You should not place an obstacle between the IR Extender's sensor and receiver.
The IR Emitter, IR Receiver, and the power extension can all be plugged into a wall sockets with a DC5V adaptor.The IR Emitter and the IR Receiver have tape on them.Glueing them to other devices is what this is for.
Stick the IR Emitter onto the Set-top Box's IR sensor by removing the tape from it.Put the IR Receiver tape in the line of sight of your remote.Make sure there are no obstacles between the remote and the receiver.
Some TVs and set-top boxes have IR ports in the back, so some IR Extenders have a jack instead of the tape.The ones with tape tend to do better because you can place it wherever you want.
Once the setup is complete, you need to turn on your TV by pressing the Menu button on the remote.This will start the setup.Hit the Enter button if you navigate to the System option from this window.Press Enter again if you want to select the device manager.You can find the Universal Remote Setup entry here.
You want to connect the remote to the device that you turn on.Select Start and confirm by pressing Enter.Pick the device type that you want to connect to and confirm.You can find your service provider by typing its name into the box.There is a list of providers on the screen.Press Enter to select the one you want.
Select a TV port to connect to the set-top box.You can see if the set-top box is working by pressing the Channel Up/ Down buttons on the Smart Touch Control.If your TV responds to these commands, you have successfully set up the IR Extender Cable and the Smart Touch Control.You can confirm in the Set-top box Control Test menu.
You can use the IR Extender cable to control your TV from the couch with the Smart Touch Control remote.It is a great solution for all peripheral devices that you can connect to a Smart TV with the IR Extender technology.
Do you use the IR cable?What type of box do you use?What do you think about this device?You can share your thoughts in the comments section.
Some pages on this site may have an affiliate link.Our editorial won't be affected by this.