The iTaste is a personal vaporizer.Smoking with electronic smoking devices can be done by the user.Vaping is an alternative to cigarettes and electronic cigarettes.The iTaste VV 3.0 has variable voltage and wattage settings so you can change them at will.
Step 1: The vaporizer needs to be turned on.
There are three buttons on the iTaste VV 3.0.Press the fire button three times in a row to turn on the device.The light around the fire button will flash three times when the device turns on.The triple click is a safety feature that prevents the fire button from being accidentally pushed.
Step 2: Put your mouth around it.
If you want to keep your lips sealed around the mouth, put them over it.You don't have to purse your lips tightly together, but you do need to pinch them together to create a seal.
Step 3: Press and hold the fire button at the same time.
When the device is turned on, pressing the fire button will cause the battery to die.As you press the fire button, suck the air out of the mouth.The counter on the device will keep a record of how many times you press the fire button.
Step 4: Release the fire button.
Release the fire button if you want to stop the vaporizing process.When you exhale the vapor that you drew into your mouth, it will be like a normal breath.Wait a moment and decide if you want to take another inhale.
Step 5: When you're done, turn off the vaporizer.
Push the power/fire button three times to turn the vaporizer off.You don't have to turn the device on and off every time, but it will help conserve the battery.When you turn the device off, the counter will reset.Leave the device on until you're done for the night if you want to keep track of how much you use.
Step 6: The battery needs to be charged.
There is a microusb port in the bottom of the iTaste VV 3.0.Plug the microusb into the bottom of the device and then into a computer or a charging port.When it is fully charged, green, yellow, and red are the colors of the power/fire light.When the device is charging, you can still use it.1.5 hours is the total charging time.
Step 7: Check the settings.
You can control the temperature of your vapor with the variable wattage and voltage settings on the iTaste VV 3.0.You can change the settings on your device.If you want to check the settings, push the power/fire button three times.The buttons should be held together for two seconds.The first reading is clearomizer resistance, the second is battery voltage, and the third is the puff counter.
Step 8: The wattage needs to be adjusted.
The iTaste VV 3.0 can be controlled by wattage or voltage.The device regulates the voltage based on the clearomizer you're using.You can set the device to the wattage by holding the fire and buttons.There is a display that says P and the setting.If you're just starting out and don't know what you like, you can use the variable wattage on the lowest setting, which is 6.If you have tried that setting a few times, you can increase the wattage to see how it affects the temperature.The hotter the temperature of the vapor, the higher the wattage.When the display is on the P reading, use the buttons to adjust the wattage.
Step 9: The voltage control needs to be switched on.
You have to control the voltage based on the clearomizer and the juice you're using.It can take some trial and error to fine-tune the settings more than with the wattage control.You can switch to voltage control by holding the fire and buttons.When the display is on the U reading, use the + or - buttons to change the voltage.The hotter the temperature, the higher the voltage.