Installation of Washer Transit Bolts for moving.

Responsive design allows for a convenient experience that matches your device's screen size.To get the best experience from our website, please follow the instructions below.

If you're using Internet Explorer 9 or earlier, you will need to use an alternate browser or upgrade to a newer version of internet Explorer.

Excess vibration can be caused by 2 elements from shipping that are still attached to your washer.

Bolts are needed to prevent damage to the internal components of the washer.

Attach the hold caps to the shipping bolt holes after locating the accessory pack that you received with your washing machine.

Failure to remove the shipping bolts and retainers before use can cause permanent damage to the washer.

There is a chance that a shipping block could be caught under the washer.

The drum of your washer spins at very high speeds to minimize noise and movement.

To check this, first place a level across the top of your washer and then adjust the leveling feet until you have a washer that is level from side to side and front to back.

The lock nut on the foot should be loosened and adjusted until the rocking is minimized.

To test the machine, set it to the spin cycle with a load of laundry.

We apologize for the time delay.

Get answers to your questions about product setup, use and care.We can help.