You have three main options: tethered, vertical and electronic float switches. A tethered switch is good for deeper sump pits with a large diameter. Vertical switches are better for narrow and shallow sump pits and will kick off the pump more often. Electronic switches are more compact and require a small sump pit.20 Apr 2021
What is vertical float switch?
A vertical float switch is a mechanical device used to detect the level of liquid within a tank, and trigger an event, such as a refill or discharge, when the liquid reaches one or more predetermined levels.8 Dec 2016
How do you adjust a vertical float switch on a sump pump?
Adjusting a manual float switch is easy. Start by moving the rod or tether up or down based on the water level in the pit. Most systems can be adjusted by hand or with a normal sized screw driver. Shorter tethers and rods work best for lower water levels while higher tethers and rods are better for higher water levels.
What is a vertical magnetic float?
A vertical float switch is one that has a stem and a magnetic float. The float fits around the stem and it rises and falls with the level of the liquid. Inside the stem, you will have one or more sealed reed switches. When the float nears one of the reed switches, the magnetic force causes the switch to open or close.2 Mar 2017
What is vertical switch?
A vertical float switch is a mechanical device used to detect the level of liquid within a tank, and trigger an event, such as a refill or discharge, when the liquid reaches one or more predetermined levels. Below we discuss five common ways the vertical float switch is used.8 Dec 2016
What is the best type of switch on a sump pump?
Electronic switches
How do you install a vertical float switch?
https://www.youtube.com/watch?v=2veutu-TPYg
How do I change a float switch?
https://www.youtube.com/watch?v=V4SH9ZnNdlk
How do you replace a tethered float switch?
https://www.youtube.com/watch?v=vYv-iWtCwwM
Can you replace a float on a sump pump?
If your sump pump does not turn on and off as it should, you may need a sump pump float switch replacement. A float switch can become broken because of debris or lack of proper maintenance.24 Nov 2015
Can you adjust a tethered float switch?
The purpose of a tethered float switch is to signal when water levels have reached the desired level. The float switch rests on the water's surface and rises along with the water. You can adjust the tethered float switch level on your sump pump in just a few simple steps.14 Feb 2018
How does a vertical float switch work?
https://www.youtube.com/watch?v=Sq1f9BcMfHA
How do you adjust a sump pump float rod?
Manual Adjustment Rod settings are made by sliding the sump float up and down the desired height. Tether settings are achieved by sliding a tether up or down beneath a mounting device such as a clamp or a tie wrap. The shorter the tether, the shallower the water needed in the sump hole to turn on the pump.