Ubiquiti Networks introduces the airCube ACB-AC Wi-Fi Router, a cost-effective wireless access point for use in your customer deployments. With a compact design and integrated 24V PoE passthrough, the airCube is a home Wi-Fi access point designed to interoperate with airMAX CPEs and is available in two models.
How do I connect my airCube to the Internet?
Connect one end of an Ethernet cable to the WAN Port on the back of the airCube. Connect the other end of the Ethernet cable to your airMAX CPE radio. 2. Connect the Power Adapter to the Power Port on the back of the airCube.
What's an airCube?
With a compact design and integrated 24V PoE passthrough, airCube AC is a high-performance home Wi-Fi access point made to interoperate with airMAX CPE devices, with remote management by UISP. Features: 802.11ac 2x2. 24V PoE in and out or power in via included PSU. UISP Mobile app support for fast setup.
How do I open ports on airCube?
- Navigate to the airCube's LAN address.
- Update to the latest stable firmware version.
- Log in to the airCube's user interface and navigate to the Network page.
- Select the Port Forward tab.
- Click the Add New Rule button.
How do I access my airCube router?
Open the web browser and type the IP address of the device in the address bar (default is http://192.168.1.1). Press Enter. Type the username and password in the login page, the default username is 'ubnt' and the password can be found on the sticker on the bottom of the airCube.14 Dec 2018
How do I reset my airCube router?
The LED lights up when the airCube is powered on. Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the LED starts flashing and then becomes solidly lit.
How do I access airCube?
Connect one end of an Ethernet cable to the WAN Port on the back of the airCube. Connect the other end of the Ethernet cable to your airMAX CPE radio. 2. The airCube can be powered in one of two ways: 5V Micro USB adapter or 24V PoE on LAN Port 1.
Why is my airCube not working?
1) Unplug Aircube (the black wifi box) from the mains and leave it off for 3 minutes. 2) Remove any cables that you have plugged into the lower ports on the back of the cube TAKING care not to unplug the upper two CABLES. 3) If you have any range extenders, remove power to them (unplug them).
How do I reset my airCube WIFI?
Push reset button and hold while powering unit2. LED panel should blink fast several times { Still hold reset button }3. LED panel should light-off { Still hold reset button }4. Release reset button when device's LED panel starts blinking slowly after three times.