The shower circuit has only one fuse located in the consumer unit.
How do I check electric shower power?
https://www.youtube.com/watch?v=3KpgUdxh9F0
Is there a fuse in a shower pull switch?
Repairing a 45 amp Pull Switch Look for a fuse or circuit breaker on the main distribution board marked shower and either remove the fuse or trip the breaker (MCB). Most of these types of switch include a neon indicator, which will glow red or orange.
How do I reset my Mira advance?
https://www.youtube.com/watch?v=vbo0k7L1dXA
How do I reset my Mira shower control?
Turn Digital Mixer off for 10 seconds. Turn back on and allow 15 seconds to reset. 2. If shower operation does not return to normal, make sure hot and cold inlets are not reversed.
What does ATL mean on Mira shower?
Important! This product is suitable for mains fed cold water only. Installation Guide. Mira Advance ATL. ADJUSTABLE TEMPERATURE LIMIT THERMOSTATIC.
Why does my shower keep beeping?
The pulsing start/ stop light and "beep" indicates that the shower is shutting down. Important! DO NOT isolate the power to the shower. The shower will purge water from its tank for a few seconds.
Can a Mira shower be repaired?
If there's an issue with your Mira shower, we're here to help. Book a repair online to get your shower up and running again our expert service engineers can come to you. Time for an upgrade? Find out more about our Supply & Fit service for new showers.
Why is there no water coming out of my electric shower?
Number 1: There is no water coming from the shower at all, or it stops and starts. This is it, the most common fault with electric showers - the solenoid valve. When the coil breaks down, the water stops running and that's what causes the problem.
Why would my shower suddenly stop working?
A shower not working properly can be due to a broken shower valve or valve cartridge. If your shower won't turn on or if you only get either hot or cold water, it likely means you have a broken valve. Faulty valves can also cause your shower handle to get stuck or make odd grinding sounds.
Why is there no water coming out of the shower?
Low pressure in a shower can be caused by several issues such as a clogged showerhead, a worn-out mixing valve, closed valve, leaking pipe, or even a faulty water heater. Don't get overwhelmed though, because we're here to help you narrow down and identify the cause of your shower woes.
Why is my electric shower not turning on?
The electric shower not turning on If your electric shower won't turn on at all, it's often a problem with the solenoid valve coil, which will need replacing. It's normally a pretty simple job for an electrician to do or some plumbers are also happy fixing electric showers.