It's a good idea to remove the built up frost from your freezer.
A small amount of frost build-up in your freezer is normal, but it can become a problem over time.Too much frost can cause problems with the freezer.There are ways to remove frost.You can thaw the excess ice by removing the build-up from the freezer.Keep the thermostat just below zero F to prevent build-up in the freezer later.
Step 1: The ice should be removed with a plastic or wooden spoon.
One of the easiest ways to remove frost build-up is by using this method.It is less likely that you will hurt yourself if you use a wooden spoon or plastic spatula.To remove the ice, dig underneath it.The freezer door has a bucket underneath it.Continue until all of the build-up has been removed.This method works best with another method.
Step 2: Rub alcohol and a heated cloth on the frost.
Put the rag into the boiling water with tongs.Rub alcohol on the cloth over the sink.The rag should be placed on top of the frost.It will start to melt.You can use a dry cloth to soak up the melted ice.When thin layers of ice need to be removed, this method works better.
Step 3: Caution is advised when using a spatula with a heated metal.
The method that requires the most caution is one of the fastest ways to remove ice.Place an oven mitt over a flame or other heat source and hold a metal spatula.Place the spatula on the ice until it begins to melt.The water should be wiped up with a dry cloth.
Step 4: Take everything out of your freezer and put it in the fridge.
Remove all the items from the freezer.Put the items in a cooler.
Step 5: Plug the freezer in.
The freezer unit needs to be unplugged in order for the frost to build up.You can leave items inside the refrigerator if it's necessary to shut it off.If the fridge is unplugged, it should stay cold for a few hours.
Step 6: Put towels at the bottom of the freezer.
Remove the trays and shelves from the freezer after it is unplugged.Place towels in the freezer to catch the melted ice.
Step 7: The freezer should be open for a few hours.
The warm air in your home will melt the ice quicker if the door is propped open.If you have to, place a wedge in the door to keep it open.If you want to speed up the process, you can put hot water in a spray bottle and spray it onto the ice.You can mop it up with a towel.You can use a hair dryer to blow hot air into the freezer.
Step 8: Warm water and dish soap are needed to clean the freezer.
Remove the ice from the freezer once it has melted.The dish soap should be mixed with 4 cups of water.To wipe out the freezer, dip a clean rag into the solution.To dry up any remaining water, use a rag.Baking soda and water solution can be used as an alternative to soapy water to clean your freezer.Baking soda and vinegar can be used to remove odors from your freezer.
Step 9: Once it gets cold, replenish it in the freezer.
After wiping it down, put it in the freezer.It will take between 30 minutes and 2 hours to return to 0 F.You should put your food and other items in the refrigerator.If you want to read the temperature on the thermostat, put it in the freezer for 3 minutes.
Step 10: It's best to keep the thermostat under 0 F.
unwanted frost will build up if the thermostat is not at the correct temperature.It is a good idea to check the thermostat once a week.If you don't have a thermometer in your freezer, put one inside.
Step 11: Don't block the freezer's air flow.
Don't put your freezer against the wall.It's a good idea to leave about 30 cm of space for the coils to cool your freezer.
Step 12: If the freezer door is not in use, close it.
You should not leave the freezer door open when cooking or moving around in the kitchen.Excess heat will be allowed into the freezer.Make sure the freezer door is tight.
Step 13: Hot items should not be put in the freezer.
Wait until the item has cooled to room temperature before putting it in the freezer.The heat will cause frost and frost-bitten foods.
Step 14: The freezer should be kept away from a heat source.
The freezer should not be placed near a heat source.This will cause the freezer to overwork, which can cause frost.