It's possible to make a King Cobra Paracord Bracelet.
Paracord is a type of rope.Some people enjoy taking the cords and turning them into bracelets.If you're in a survival situation, making a paracord bracelet will give you an edge.It's a good idea to have at least ten or twenty feet of stuff around your wrist.For the facts that they store a lot of cord, King Cobra paracord bracelets are the most recommended kind.
Step 1: Pick up some cords.
If you want your bracelet to be larger, you'll need more paracord.One foot of cord should be put aside for every inch of bracelet.Measure your wrist and see how much you need based on that.Paracord can be purchased from a wholesale store.50 feet of it can be had for as little as 3.99USD.This equates to about $1 per bracelet.There are different types of paracord.Paracord 550 is a military-certified grade that supports up to 500 pounds of weight.
Step 2: Take a piece of paracord.
There is a straight piece of paracord.Measure out the paracord to make sure it will fit around your wrist.Upgrading to a king cobra bracelet will make it a lot bigger.You should leave some room between your wrist and bracelet for the extra rope.
Step 3: Attach the buckle to the other end.
Paracords can be used for making ties.Attach a bucket device to your wrist with either end of your cord.
Step 4: The cords are around the foundation.
A lot of the bracelets you make will be tied around the foundation of your work.You can pull two cords through the top loop of your foundation.Take the cord from one side and Wrap it around the other.If you were lacing a shoe, alternate between the two.The opposing cords should make loops for the other to go through.There will be a sequence of knots going down the foundation.Making the cords different colors is a good idea.If you slip up in the knotting process, you'll be able to identify more easily.
Step 5: Take a look at the tightness.
You should keep your bracelet's flexibility in mind as you coil your cords around it.The tighter you pull the knots, the more rigid they will be.Flexibility is what allows bracelets to hug the shape of your wrist.It's best to have a good balance between the two.After making a few coils, feel the bracelet for a basic idea of how knot tightness is affecting flexibility.
Step 6: The lighter can be used to melt the loose ends.
It's time to tie up the loose ends of your bracelet after you've coiled the ropes.Take a lighter to the ends and melt them.This will be used to finish the cords.It shouldn't be a problem if you've coiled the cords tightly around the foundation.You should use the flat end of a wet knife after melting the lighter.The ends will not be affected by this.
Step 7: It's time to wear your basic paracord bracelet.
A basic cobra bracelet is easy to make, but it doesn't leave a lot of paracord for you to use in survival situations.The foundations of a regular bracelet are used to build a king cobra bracelet.Before moving on with the king cobra, you should make sure your bracelet is in good shape.The supplies for a king cobra are double that of a regular cobra bracelet.You'll need 18 feet for your king cobra if you have a 9 inch bracelet with 9 feet of cord.
Step 8: The cobra bracelet has fresh cords around it.
It is easier to make a king cobra bracelet than it is the basic cobra.Attach a cord to one end.Make another knot by pulling it downward.Continue these steps until you've coiled your new cords around the cobra bracelet.It's a good idea not to make the knots too tight.If it comes time to use it, you'll still be able to unfurl them without too much hassle.
Step 9: There are two or more paracord colors.
The look of your bracelet will be determined by the King Cobra paracords.If you want to add beauty to your bracelet, you should use more than one color.An elaborate pattern will be created when the cords are intertwined.
Step 10: Cut off the ends.
The king cobra bracelet is meant to be unfurled and the regular cobra cords are often made a permanent part of it.You can cut off the excess length with a knife or scissors.To cool the molten edges, use a wet knife and melt the ends with a lighter.
Step 11: You should take it out with you.
Although some may prefer to keep their paracord bracelets for show, a king cobra bracelet is essentially made for survival use.You can use the king cobra layer of your work as you please.Some of the uses you may have for it are hunting, fishing, camping and climbing.If you want, you can leave it for decoration's sake.Paracord bracelets are good because of their practical uses, but some people prefer to leave it as a clothing accessory.
Step 12: Purchase a premade paracord bracelet.
Bracelets made in an already-made form can be purchased if you're not into crafts projects.Paracord-related survival gear can be found at outlets like Gorilla Para cord.There is a paracord community on eBay.You might want to look for an all-inclusive paracord kit.