It is easy to make plastic bottles into bangles.You can make lots of bangles that match different outfits if you decorate them in many different ways.Re-purpose those plastic bottles into something stylish.
Step 1: The drink bottle needs to be cleaned out.
Before making the bangles, allow the bottle to dry.
Step 2: Measure the bangle's width.
Along with what the bangle needs to hold by way of decoration, this will be determined by your preference.
Step 3: Take off the width of the bottle.
It will be easier to remove masking tape than stronger tape.
Step 4: Use a craft knife or scissors to cut out the bangle from the bottle.
Work slowly and carefully.If you don't feel comfortable cutting something for yourself, ask someone who is willing to do it for you.
Step 5: If it's necessary, sand the edges.
If the edges seem a little rough, use an emery board to make them smooth again.
Step 6: You can cut as many plastic bangles as you want.
If you're making gifts for friends, it's a good idea to make lots of basic bangles.
Step 7: You can choose the duct tape.
Do you have a favorite color or pattern of duct tape?The choice is yours to make.
Step 8: Take a piece of duct tape and cut it.
Wrap the tape around the bangle to make sure the join is on the inside.
Step 9: Cut a small piece of duct tape.
Run it around the inside join so that it won't bother you when you wear it.
Step 10: If you want, add decorative elements.
You should draw up the design before you cut, arrange and glue the decorative pieces.It is possible to glue on a piece of leather in a line, zigzag formation or as a series of designs.Costume jewels, beads, and other pretty objects can be added to the bangle.Add some ribbon for a final touch.
Step 11: Done, done.
The bangle is ready to wear.
Step 12: To fit around the bangle, cut a length of foil tape.
Allow a small overlap as well as the bangle's size to allow you to wrap it around the outer side.
Step 13: Wrap the bangle with foil tape.
The join should be in the middle of the bangle.The beads will cover this join.
Step 14: Attach double-sided tape to something.
If you want to see the foil tape on either side of the bangle, the width should be less than it is.
Step 15: Wrap the tape around the bangle's outside edge.
It's important to cover the join from foil tape.When you're ready to add the micro beads, leave the upper backing on the double-sided tape.
Step 16: Place the beads in a container.
The place for you to roll the bangle will be provided by this.
Step 17: The double-sided tape has backing.
Roll the bangle slowly in the container of beads, pressing gently to pick up the micro beads on the double sided tape.As you do this, hold the bangle by the edges.
Step 18: The micro beads need to be brushed over.
This will keep them in place.When you press more micro beads into place, use the sealant to keep them intact.
Step 19: Allow the glue to dry.
The areas which seem to be missing micro beads should be adjusted using the sealant.
Step 20: To dry, place wax paper or a silicone sheet on top.
Fix loose beads when they are dry.
Step 21: It was finished.
The bangle is ready to wear.
Step 22: The fabric can be chosen.
Don't hold back, this can be from almost any source.It's possible to make bangles that match your entire wardrobe.Old house linen Handkerchiefs are one of the sources of fabric.
Step 23: Take the fabric and make strips.
Step 24: You can choose your method of application.
You can either wrap the fabric around and around the bangle, creating neat overlap lines, or you can glue the entire bangle into the middle.Glue the starting end, then every few wraps of the fabric with the first way.Roll glue over the bangle first, then glue at the join of the fabric.Attach the join with a length of ribbon or scrap fabric.
Step 25: If you like, add decorative elements.
You don't need to do this if the fabric looks great on its own.Glue or sew on beads, buttons, jewelry pieces, feathers, etc.
Step 26: Done.
The bangle is ready to wear.
Step 27: You can pick a color of foil paper.
Pick a color to match the outfit.
Step 28: Take the paper foil and measure.
Measure the bangle's circumference along with a small allowance extra for wrapping around the inner side.
Step 29: Attach the paper foil to something.
Follow the measurement you made.
Step 30: The bangle should be wrapped.
Wrap the foil paper piece around the outside of the bangle.
Step 31: Fix the paper from the inside.
To keep the foil paper from unraveling, glue it in place.To cover the foil paper join, glue a length of thin ribbon.
Step 32: The foil paper can be applied with Mod Podge or another clear sealant.
It will be better to prevent it from being ripped.Allow the bangle to dry before you wear it.