You can sometimes see something wrong with your appliance.Maybe the light in your refrigerator won't turn on.You don't know if it's necessary to call a professional or if you can fix it on your own.There is a difference between a quick fix and an expensive repair.
Step 1: The power cord should be plugged in all the way.
Pull out the fridge and press the plug into the outlet.Check the electrical cord of your appliance.The appliance might malfunction if there are exposed wires or cuts in the cord.Do not use the cord if this is the case.
Step 2: If you were using an extension cord between the refrigerator's main cord and the outlet, you should remove it.
It is possible that the extension cord is damaged or faulty.The refrigerator can be plugged directly into the outlet.If the problem is solved, replace the faulty extension cord.
Step 3: In close proximity to the refrigerator, try another appliance.
The other appliance should be plugged into the same outlet as the refrigerator.If that appliance doesn't work, check the circuit breaker box.There is a chance that you have a tripped breaker.
Step 4: Plug the refrigerator into a different outlet.
The problem is with the outlet if this solution is successful.The current and voltage of the outlet can be checked with a multimeter.If you don't know how to use the tools, contact a repair technician or electrician.
Step 5: Leave it unplugged for a while and then plug it back in.
The circuit board may be reset.Leaving it unplugged will allow them to lose charge.
Step 6: The temperature gauge is inside the appliance.
It could have been too warm for the refrigerator to turn on if the dial was bumped.The refrigerator gets cold from the freezer so it's important to check the temperature settings.There is a problem with the freezer setting.It should be set in the range of 37 and 40o F for the fridge and -15 to -18o for freezer.
Step 7: Make sure there's enough air around the appliance.
The space between the walls and the appliance should be checked.There should be a gap between the sides of the appliance and the top.The machine needs air to function.
Step 8: The coils should be cleaned with a vacuum or brush.
The appliance could act funny because of this part.The appliance should be turned off so that the cleaning can be done.Floor and rear-mounted coils should be cleaned twice a year.
Step 9: Test for continuity and overheating.
Plug the refrigerator back in after 2 hours.The compressor should be checked by a repair technician if it starts running again.To test for continuity, use a multimeter.The compressor motor, overload protectors, and the temperature control are included.You may need to read your owner's manual for the locations of the components.A faulty part will need to be replaced.
Step 10: The appliance has a temperature gauge.
The refrigerator's temperature could have been raised if the dial had been bumped.The refrigerator gets cold from the freezer so it's important to check the temperature settings.There is a problem with the freezer setting.It should be set in the range of 37 and 40o F for the fridge and -15 to -18o for freezer.
Step 11: The vents need to be inspected.
The drain tube should be checked for debris and ice.If necessary, remove debris.This obstruction could be a problem.
Step 12: Make sure your door seals are working.
There is a piece of paper between the seals and the appliance.Pull the paper out of the door.If the seals are working well, you should feel tension.All around the appliance's seals, repeat the process.The seals are starting to fail if there is no tension.A failing door seal can be caused by cracks and rigidity.
Step 13: Take a look at the refrigerator components.
To test the continuity of the appliances, use a multimeter.The door switches, the defrost heater and timer are included.Your problem could be if any of these parts fail.
Step 14: Wait a day to see if the problem can be solved.
There are a number of factors that could cause your refrigerator to run continuously.It might take a while for the refrigerator to cool completely if you live in a humid environment.It could take a long time for it to cool down.
Step 15: If you have too much ice built up in the freezer, it's a good idea to defrost it.
The refrigerator will have to constantly cool if there is a build up of debris on the coils.The refrigerator will work harder to keep cool if the defroster is faulty.
Step 16: The door seal needs to be tested.
The door of your refrigerator has a seal.Your refrigerator will have to keep cooling itself if the seal is faulty.Check the seal with a piece of paper.Pull the piece of paper out of the door.A faulty door seal may be your problem if there isn't resistance when pulling the paper out.The test should be repeated along the seal.
Step 17: The coil should be cleaned with a vacuum or brush.
If it's dirty, the refrigerator will have to work harder to stay cool.The appliance should be turned off so that the cleaning can be done.Floor and rear-mounted coils should be cleaned twice a year.
Step 18: The refrigerator's various components can be tested.
This will require using a multimeter.The components include the compressor relay and motor.A fault in one of these components can cause the refrigerator to malfunction.
Step 19: The outlet voltage should be tested.
To test the outlet voltage of the refrigerator, use a multimeter.Only with the proper tools and safety measures can you do this.The temperature should be between 118 and 121 degrees.
Step 20: Take a look at the drain pan and tube.
A dirty drain pan might be to blame for the pooled water outside the refrigerator.The drain pan should be cleaned every year.A blocked drain tube might be to blame for the pooling of water inside the refrigerator.A solution of water and baking soda or bleach can be used to clean out a drain tube.The drain pan and tube should be turned off before the refrigerator is turned on.
Step 21: Make sure the refrigerator is level.
The defrost drain might leak if your refrigerator is not level.When level, the refrigerator was designed to operate correctly.Put a level on top of the refrigerator.Take a look at the back and front of the appliance.
Step 22: The water filter needs to be checked.
Water may leak out if the water filter is not fitted correctly.The water filter needs to be removed and reinstalled after the refrigerator is unplugged.Check the water filter head and housing for cracks.The filter head or housing will need to be replaced if there is damage.