The car won't start and it says...ASC system service required, how to do it
The active stability control takes control of the anti-lock brake system, traction control function and stability function to help maintain the vehicle's control and traction.This section should be read in conjunction with the page on the anti-lock brake system.There is an anti-lock brake system.The function of traction control is 4-37.The function of stability control is 4-37.Don't over-rely on the ASC.The nautral laws of physics can act on the vehicle.The system can't help you to maintain traction and control of the vehicle in all circumstances.Accidents can be caused by reckless driving.The driver has a responsibility to drive carefully.The traffic, road and environmental conditions are taken into account.The same type and size of tire should be used on all 4 wheels.There is a chance that the ASC may not work correctly.Do not install LSD on your vehicle.It is possible that the ASC may stop functioning.
The active stability control takes control of the anti-lock brake system, traction control function and stability function to help maintain the vehicle's control and traction.
This section should be read in conjunction with the page on the anti-lock brake system.
Don't over-rely on the ASC.The nautral laws of physics can act on the vehicle.
The system can't help you to maintain traction and control of the vehicle in all circumstances.Accidents can be caused by reckless driving.The driver has a responsibility to drive carefully.The traffic, road and environmental conditions are taken into account.
The same type and size of tire should be used on all 4 wheels.There is a chance that the ASC may not work correctly.
Do not install LSD on your vehicle.It is possible that the ASC may stop functioning.
A whining sound may be heard from the engine compartment.The sound is related to checking the operations.It doesn't show a malfunction.
You may hear a whine from the engine compartment if the ASC is activated.
The traction control function prevents the drive wheels from spinning too much and helps the vehicle to start moving.As the vehicle turns, it provides sufficient driving force and steering performance.
When driving a vehicle on a snowy or icy road, be sure to install snow tires and drive at moderate speeds.
The stability control function helps the driver maintain control of the vehicle on slippery roads or during rapid steering maneuvers.The engine output and the brake are what it works on.
When the ignition switch is turned to ON, the ASC is activated.You can turn off the system by pressing the switch for 3 seconds or more.
The multi-information display will be illuminated when the ASC is turned off.To turn off the display, press the "ASC off" switch.
Pressing the pedal may not allow the engine speed to increase.If you're in a situation where it's difficult to move out your vehicle, you can turn off the ASC with the "ASC Off" switch.
The stability control and traction control functions are turned off by using the "ASC off" switch.
The "mistaken operation protection function" will turn on if you press the "ASC off" switch after theASC is turned off.
It will not be possible to turn the ASC off after the mistake operation protection function is activated.
If you want to turn the system off again, you have to restart the engine and press the "ASC off" switch.
The information screen in the multi-information display will blink when the ASC is operating.
When the display blinks, it means that the road is slippery or that your vehicle's wheels are beginning to slip.Drive slower if this happens.
When you start the engine, the multi-information display may come on.The battery voltage dropped when the engine was started.If the display goes out immediately, it does not indicate a malfunction.
It is more likely that the display will blink when a spare tire is put on your vehicle.
The display will blink if there is an abnormal condition in the system while driving.