Carpets with dirty edges can cause an allergy flare-up because of the trapped dust.Cleaning your carpet by the skirting boards is fairly easy if you have a vacuum cleaner and scrub brush.If you see gray or black around the edges of your carpet, it's a sign that the carpet is dirty and needs to be cleaned.A deep carpet cleaning can help you fight dirt.
Step 1: You can vacuum your edges using a crevice attachment.
Pushing the vacuum cleaner over the carpet isn't enough to keep it clean.The attachment that comes with your vacuum cleaner can be used to get into the cracks.Dust, dirt, and debris can be sucked up by pressing the tip of the attachment down into the carpet.You could use your crevice attachment to vacuum the edges once a week.The attachment might be cut at an angle.
Step 2: All debris can be removed by dragging the crevice attachment in both directions.
If you only vacuum in one direction, you won't be able to clean your carpet.Pull the attachment along the skirting board slowly.To get the carpet as clean as possible, make 2 or 3 passes in each direction.There are areas that are dirty.Before you move on to the next spot, make sure you remove all visible dirt and debris.
Step 3: It's a good idea to clean your carpet before it becomes dirty.
It is easy to forget about your edges.It is difficult to clean the carpet edges when there is a build-up of dirt and dust.Don't let your vacuuming schedule get in the way of keeping your carpet edges clean.Dirt and debris can get trapped in your carpet edges even if you can't see them.
Step 4: A carpet cleaning solution can be used to deal with stains.
When removing stains from carpet, neutralized alkaline or acidic-based products are usually the best.There are spills and stains along the carpet edges.Before trying to clean the stain, gently blot up excess fluid.To clean a stain, spray a carpet cleaner on it, then use a white cloth to clean it up.Follow the directions on your carpet cleaner to get the best results.To remove a stubborn stain, apply more cleaner.Paper towels and rags can bleed into the carpet, so use a white cloth.
Step 5: Dust can be vacuumed from the edges.
There is a black or gray line around the edges of your carpet.Drag the attachment along the edge of the carpet after you insert it into your vacuum cleaner.The edge should be vacuumed in the opposite direction.You can use a handheld vacuum cleaner if you don't have a crevice attachment.After you vacuum, your edges will look dirty.This will remove the debris so it doesn't stick to your scrub brush.
Step 6: The edges should be scrubbed with a long, thin cleaning brush.
To clean the edges of the carpet, use a toothbrush, or a cleaning brush.The brush should be put into the carpet and scrubbed along the skirting boards.Dust and dirt can be lodged in the carpet.To scrub the edges, use a white rag.It is possible to accidentally rub against a nail or staple.
Step 7: You should vacuum up the debris that you knocked loose.
Make a pass with your vacuum cleaner by using your crevice attachment.The loosened debris can be removed by pulling the crevice attachment along the skirting board.It is okay that your carpet edges look dirty.
Step 8: You can use a carpet cleaner on the edges of your carpet.
You can use a carpet cleaner or a solution of water and vinegar.The cleaner should be sprayed along the edges of the carpet.Don't saturate the carpet by applying enough cleaner.Follow the directions on your carpet cleaner.
Step 9: Use your scrub brush to work the cleaner into the carpet edges.
If the carpet edges are still damp, use your carpet edge cleaning brush, toothbrush, or grout cleaning brushes to clean it.Use your scrub brush to make passes along the skirting boards.This will allow for the release of dirt, dust, or debris.A white rag can be used to scrub your carpet edges.There may be nails along the edge of the carpet.Dirt and debris will start to come out of your carpet fibers as you scrub, so you will likely notice that the carpet is starting to look cleaner.
Step 10: You can vacuum up the rest of the debris with your attachment.
You can vacuum your carpet if the trapped debris is released by the carpet cleaner.Dust and dirt can be sucked up with your crevice attachment.When all of the debris is gone, drag the attachment in both directions.If you still have dark lines around your edges, apply more carpet cleaner and scrub them again.You may need to use a carpet cleaner to get your edges clean if this doesn't remove all of the staining.
Step 11: Very dirty edges, deep clean.
A deep cleaning may be the best option if you have a lot of stains on your carpet.To expose your carpet edges, move everything away from your walls.If you want to treat stains, spray your carpet cleaner onto the edges.Pull the hose nozzle along the carpet edges after attaching a hose to the machine.To clean the carpet edges, reverse and go in the opposite direction.Rent or buy a carpet cleaner from your local home improvement store.You could try a rug doctor.The carpet cleaner will suck the cleaning fluid out of the carpet.You can use the carpet cleaning solution for your device.