The cost to refinish hardwood floors is calculated using an average per square.
The average homeowner will spend between $1,550 and $2,110 on refinishing their hardwood floors.Depending on the condition of the wood, you can expect to pay between $3 to $5 per square foot with 80% of your costs attributed to labor.You can get free estimates from hardwood floor refinishers.
Most homeowners spend between $3 and $5 per square foot to have their wood floors sanded, stained, and finished.A 20x16 (320 square foot) living room floor will cost about $1,230, while a 12x12 (144 SF) bedroom floor costs about $540 to fix.
The average cost for a 16x16 room is between $750 and $1,280, or between $3 and $5 per square foot.Depending on the project size and the current condition of the flooring, most homeowners spend between $1,150 and $2,110 on wood floor refinishing.If your wood floor has no dents or cracks, a refinishing can make it look new again.
You can expect to pay $3 to $5 per square foot for refinishing a wood floor because of the large amount of prep work and labor that goes into the job.There will be a minimum charge for a refinishing job because of the cost to hire the right equipment and materials.
When calculating the cost of refinishing your hardwood floors, labor will make up more than 80% of the final price.The average cost of labor is $3.50 per square foot.You can get cheap materials on the other end for your project.
New floors cost more than refinishing hardwood floors.The average cost to install hardwood flooring is between $4 and $10 per square foot.The average homeowner spends between $2,200 and $8,100 to install new wood flooring.
It is best to refinish rather than replace hardwood because it can be sanded down and filled with gashes.If the solid wood flooring was installed in the last few years, it makes sense to extend its life and the value of the installation for as long as possible.
If the wood was damaged by water, it will need to be replaced.It will be difficult to pull the floorboards together if they are widening.If you want to save the floor, you have to pull it up and put it back together.
In addition to getting quotes from multiple hardwood flooring refinishers, here are the essential questions to ask before selecting a company and starting your project.
The average cost to refinish hardwood floors is half that of a new floor and refinishing is a much more efficient method of updating your floor.
When you find hardwood underneath your old flooring, you may need refinishing.Even if they don't do refinishing, some contractors focus on removing old flooring quickly and with as little mess as possible.
The three stages of refinishing a hardwood floor are sanding, staining and finishing.
The current condition of the floor will affect the depth of sanding required.Sanding might not be necessary if the floor is in good shape and just the refinish needs to be renewed.
Once sanded, your wood flooring must be cleaned down to every last bit of dust or it can catch in the finish.For about $0.89/SF, you can have your wood floors cleaned aggressively with two rounds of cylindrical scrubbing and a hand scrub and edging, with the hopes that it will do a good enough job preparing your floor for its refinish instead of sanding.Dirt, grease, hair, dust, and other debris are removed from hardwood floors.It won't remove deep scratches, odors, paint, or stains, even though it removes dirt from your floor.
This method of sanding uses a vacuum to catch most of the dust that comes from sanding.If any members of the house have breathing problems or allergies to dust, it is a highly preferred method of regular sanding.Dustless buffing is an option.The price of these machines varies from $300 to $6,200.Do you know if your contractor offers this additional service?
Pine and cedar need a second or third coat of stain or conditioner, while Verawood and Wamara take longer to dry.Unless one area is worn down and has lost its color, you don't need to stain the wood.Keep in mind that you might need to change your baseboards to match if you stain all the flooring a new color for $0.34/SF per coat.
After the stain is done, one or two coats of the refinisher are used.Water and oil-based finishes are the most common types of finish.
Depending on the type of wood you choose, you can expect to spend between $40 and $60 per gallon.Water-based and acid-cured finishes start at $50 per gallon.
Oil-based polyurethane gives a more traditional look that gets richer over time.It costs less at $30/gallon.The scratches on this finish don't seem to stand out as much as they do with water-based finishes.
It is normal for a whole board to be replaced when there is significant damage to the floor.
Water-based finishes dry faster, so that the refinished floor can handle light foot traffic within two days, but they have the same curing time as oil based finishes.They cost more than $50/gallon.
Water-based finishes will not get richer with age in the way an oil- based finish will, which is essential to know when using light-colored woods.If you use this finish on darker-colored floors, you'll see more scratches because they appear white on water-based urethane.Furniture can be moved back in after 24 hours if the finishing coat is water-based.
Some of the oil- and water-based finishes are smell sensitive.
The acid-cured finish comes in either a one- or two-component finish with an acid catalyst and alcohol solvent.You can recoat it after 48 hours.It costs $62/gallon and is a very durable finish.Full-face respirators must be used during the refinishing work because it is very flammable and has a strong odor.
When doing historical renovations, paste or liquid wax can be spread on the floor and buffed into it.approx.Wax finishes look more natural than other finishes, and more wax can be applied to high-traffic areas at any time.
These oils can be used in humid climates but are usually more expensive than other oils.
You will have to pay for the stain and finish and the equipment rental.You will spend a lot of time sanding and cleaning up the dust.It will cost about $900 to buy everything you need.
A contractor who specializes in refinishing wood floors is one of the best options because they will have mastered their sanding, staining, and refinishing processes down to a fine art.Sometimes the floor is so old that nothing can save it, and all the time and energy is wasted, whereas a flooring professional will know almost immediately what is worth saving.Old flooring removal is one of the things a contractor can do to save you time and frustration.
Due to the costs of equipment, time taken, cleaning, and the high risk of sanding the floor unevenly in places to where it must be replaced, many homeowners have regretted refinishing their floors themselves.The equipment can cause a lot of damage to the floor and leave it looking like a home-done job.If you don't know how to fill cracks, your staining will be chaotic rather than evenly distributed.Some people have their oily rags spontaneously combust when they don't seal them.
If treated well, a solid wood floor can last from 20 to 160 years without a refinishing, depending on its thickness and quality, but high traffic can shorten that time considerably.You should maintain your wood floors.
refinishing your hardwood floors can make them look like new again at a fraction of the cost of replacing them, and you can even stain them to a new color for a visual change.It's better to hire a pro for this work as there are too many things that could go wrong and you have to pay twice as much to fix them.
The low-down on today's finishes can be found at http://www.woodfloorbusiness.com/sanding-finishing.