The pants that looked like a perfect match for your cute blouse in the store didn't match when you got home.Maybe you have a cute pair of pants that need a bit of pizazz?You can dye your own!
Step 1: The machine needs hot water.
You should use enough for your cloth to move.
Step 2: Add the proportions indicated on the package.
Step 3: The fabric was wet in the hot water.
Step 4: Put thewrinkle in the dye bath.
Step 5: The machine should be set for the longest wash cycle.
For at least half an hour, the fabric should be in the dye bath.If necessary, you can reset the machine before it gets to the rinse cycle.
Step 6: When the water runs clear, rinse the dye away.
If you want to wash darker colors, use warm water and rinse thoroughly in cool water.
Step 7: The pants can be dry on the clothes line or in the dryer.
Step 8: Use the highest water level, hot water, and a cup of bleach to clean the residual dye out of your machine.
Step 9: The lint traps need to be cleaned out.
Step 10: The hot water will allow your fabric to move freely.
Step 11: You can add dye to the proportions on your package.
To mix, stir.
Step 12: In hot water, pre-wet your fabric.
Step 13: Add to the dye bath.
Step 14: Keep stirring for 10 to 30 minutes.
Change direction of stirring, up/down, side to side, etc.
Step 15: When the water runs clear, rinse in warm water.
Step 16: Mild detergent is used to wash item in warm water.
Step 17: It's a good idea to rinse thoroughly in the water.
Step 18: It is dry.
Step 19: Immediately clean sink or bucket with chlorine bleach.
Step 20: It was finished.