The only way to install vinyl wall base is by cutting inside and out.
Even though it is highly visible, baseboard is one of the less thought about aspects of flooring.Due to excessive floor traffic, floor edges and wall bases would eventually look worn around doorways or corners.
If you don't use quality materials like rubber or vinyl, the baseboards will start to look worn.For a slightly cheaper price, vinyl is almost as flexible as rubber.Flexco Base 2000 is a popular blend of vinyl and rubber.
If you need to get rubber and vinyl base boards done quickly, how do you do it?We have a short video on how to go about it so it is always done right.
If you install new flooring yourself, you know how important it is to clean the subfloor before putting it in place.It is the same with rubber/vinyl baseboard.
Clean the base of your walls thoroughly before you do any cutting, gluing, trimming, or attaching.Make sure the walls are dry so the glue will stick.
It's important to choose the right height of the baseboard.Floor City can help you determine which height works best for you, based on the type of flooring and walls you have.
To start, place your baseboard pieces on the floor near the wall.Damage to the materials in your work area can be prevented by doing so.You can cut your baseboard to a custom size by placing it in a wall corner and drawing a cut line.
Cut your base piece to fit in the space you need it in.It is important to have a proper cutting tool for cutting the board.Home Depot has a lot of handheld cutting tools.
How you apply your glue affects how well it sticks to the wall.If you use rolls or baseboard pieces, the way you apply the glue might be different.
If you leave a quarter inch space at the top of your base piece, the glue won't stick to the wall surface.If you know where the top side of each piece is, you can apply the glue in any direction.
The board piece or roll should be placed at the base of the wall.To make sure the piece sticks, use a small hand roller.If you stretch the base, roll in the direction from your starting point.
It's important that your baseboard looks seamless around wall corners.To make this happen, place the baseboard roll around a corner edge and mark a cutting point with a pen.To cut the marked point, use an inch-and-a-half wood chisel.
The board material will fit around the corner section if you do this.Wrap the board material around the small tube to cut the V-shaped grooves.